IPS7071GTRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Feature | Auto Restart |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Switch |
| Resistance | 80mOhm |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 1.25W |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Current Rating | 1.5A |
| Base Part Number | IPS7071GPBF |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 35V |
| Voltage | 5.5V |
| Interface | On/Off |
| Nominal Supply Current | 2.5mA |
| Output Configuration | High Side |
| Power Dissipation | 1.25W |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 2.5mA |
| Propagation Delay | 15 μs |
| Input Type | Non-Inverting |
| Turn On Delay Time | 35 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 6V |
| Clamping Voltage | 70V |
| Max Input Voltage | 35V |
| Output Current per Channel | 1.5A |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 45 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~35V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature |
| Output Peak Current Limit-Nom | 5A |
| Rds On (Typ) | 80m Ω |
| Drain to Source Resistance | 80mOhm |
| Built-in Protections | OVER CURRENT; THERMAL; TRANSIENT |
| Height | 1.4986mm |
| Length | 4.9784mm |
| Width | 3.9878mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IPS7071GTRPBF Overview
Tape & Reel (TR) is how it's packaged.This package is included in 8-SOIC (0.154, 3.90mm Width).A Surface Mount mounting is used for the LED driving board.There is a switch type of General Purpose.To ensure reliable operation, set the temperature to -40°C~150°C TJ.The LED driver is equipped with 1 outputs.A voltage of Not Required is used to power it.It has a maximum output voltage of N-Channel volts.There are Auto Restart features available on the LED driving board.It belongs to the IPS7071GPBF family.It consists of 8 terminations in total.8 pins are used for operation.It has 1 functions.To comply with the operation criteria, the maximum output current is reduced to 1.5A.The supply voltage can be 14V for high efficiency.Surface Mount is mounted in the way.Currently, the LED driving board has 80mOhm resistance.This case results in a 1.5A output current.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.When using this LED driving board, it is recommended that the supply voltage is set to 35V.There is a maximum input voltage of 35V volts.There is a minimum input voltage of 6V volts.A maximum current requirement of 2.5mA is required for its operation.Electrical components classified as Switch belong to this category.
IPS7071GTRPBF Features
Supplied from 14V
Resistance of 80mOhm
IPS7071GTRPBF Applications
There are a lot of Infineon Technologies IPS7071GTRPBF Power Switches ICs applications.
- Telecom and Network Systems
- Smart Phones, Feature Phones
- Low Voltage I/O System Power
- Wearable Devices
- Hot-Swap Systems
- HDD and SSD
- USB3.1 Power Delivery
- Various applications equipped with buttons
- PC Cards
- Set-Top Boxes
