IPS7081RTRLPBF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-5, DPak (4 Leads + Tab), TO-252AD |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C |
| Packaging | Cut Tape (CT) |
| Published | 2007 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| Type | Switch |
| Resistance | 55mOhm |
| Power Rating | 2.5W |
| Max Power Dissipation | 2.5W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Current Rating | 2.3A |
| Base Part Number | IPS7081RPBF |
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Max Output Current | 2.3A |
| Operating Supply Voltage | 5.5V |
| Voltage | 5.5V |
| Interface | On/Off |
| Nominal Supply Current | 2.5mA |
| Current | 2.3A |
| Output Configuration | High Side |
| Power Dissipation | 2.5W |
| Output Current | 2.3A |
| Max Supply Current | 2.5mA |
| Propagation Delay | 15 μs |
| Input Type | Non-Inverting |
| Turn On Delay Time | 15 μs |
| Clamping Voltage | 70V |
| Output Current per Channel | 2.3A |
| Voltage - Load | 6V~35V |
| Fault Protection | Over Temperature |
| Output Peak Current Limit-Nom | 9A |
| Rds On (Typ) | 55m Ω |
| Drain to Source Resistance | 55mOhm |
| Built-in Protections | OVER CURRENT; THERMAL |
| Height | 2.3876mm |
| Width | 7.49mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
IPS7081RTRLPBF Overview
It is packaged in the form of a Cut Tape (CT).This package is included in TO-252-5, DPak (4 Leads + Tab), TO-252AD.The LED driver is mounted as Surface Mount.Ensure reliable operation by setting the temperature to -40°C~150°C.The lighting driver is equipped with 1 outputs that can be used.This object belongs to the IPS7081RPBF family.It contains 4 terminations.In order to operate, the 5 pins are used.Currently, there are 1 functions associated with the lighting driver.The maximum output current is reduced to 2.3A to meet the operation criteria.As long as the supply voltage is 14V, high efficiency can be achieved.Surface Mount is mounted in the way of this lighting driver.There is 55mOhm resistance on the LED driver.In this case, the output current will be set to 2.3A.For maximum efficiency, the supply voltage should be set to 5.5V.There is a maximum current requirement of 2.5mA for its operation.This electrical component has a classification of Switch.
IPS7081RTRLPBF Features
Supplied from 14V
Resistance of 55mOhm
IPS7081RTRLPBF Applications
There are a lot of Infineon Technologies IPS7081RTRLPBF Power Switches ICs applications.
- USB Protection
- USB Power Distribution
- Telecom and Network Systems
- Hot Swaps
- Portable Video Game Players
- Wearable Devices
- Portable Music Players
- Portable GPS
- Hot Swap
- Portable Devices
