IPS7081STRLPBF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-5, D2Pak (4 Leads + Tab), TO-263BB |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C |
| Packaging | Cut Tape (CT) |
| Published | 2007 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| Type | Switch |
| Resistance | 55mOhm |
| Power Rating | 2.5W |
| Max Power Dissipation | 2.5W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Current Rating | 2.3A |
| Base Part Number | IPS7081SPBF |
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Max Output Current | 2.3A |
| Operating Supply Voltage | 5.5V |
| Voltage | 5.5V |
| Interface | On/Off |
| Nominal Supply Current | 2.5mA |
| Output Configuration | High Side |
| Power Dissipation | 2.5W |
| Output Current | 2.3A |
| Max Supply Current | 2.5mA |
| Propagation Delay | 15 μs |
| Input Type | Non-Inverting |
| Clamping Voltage | 70V |
| Output Current per Channel | 2.3A |
| Voltage - Load | 6V~35V |
| Fault Protection | Over Temperature |
| Output Peak Current Limit-Nom | 9A |
| Rds On (Typ) | 55m Ω |
| Drain to Source Resistance | 55mOhm |
| Built-in Protections | OVER CURRENT; THERMAL |
| Height | 4.826mm |
| Length | 10.668mm |
| Width | 11.3284mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
IPS7081STRLPBF Overview
As you can see, it's packaged in the way of a Cut Tape (CT).It's included in the TO-263-5, D2Pak (4 Leads + Tab), TO-263BB package.It has been mounted as Surface Mount on the LED driver.To ensure reliable operation, set the temperature to -40°C~150°C.There are 1 outputs available on this lighting driver.It belongs to the family IPS7081SPBF.The termination count is 4.The operation is performed through the 5 pins.As far as functions are concerned, the lighting driver has 1.Maximum output current falls to 2.3A when operation criteria are met.As long as the supply voltage is 14V, high efficiency can be achieved.In this case, it is mounted in the way of Surface Mount.In this LED driving board, there is 55mOhm resistance.This results in a 2.3A output current.In order to maximize efficiency, the supply voltage should be set at 5.5V.It requires a maximum current requirement of 2.5mA.In this case, the electrical component is classified as Switch.
IPS7081STRLPBF Features
Supplied from 14V
Resistance of 55mOhm
IPS7081STRLPBF Applications
There are a lot of Infineon Technologies IPS7081STRLPBF Power Switches ICs applications.
- Various applications equipped with buttons
- Portable Devices
- USB Power Distribution
- Hot-Swap Systems
- Set-Top Boxes
- USB Ports/Hubs
- Smart Phones, Feature Phones
- Wireless/Networking Cards
- Portable GPS
- PC Cards
