IPS7091PBF
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-5 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Type | Switch |
| Resistance | 80mOhm |
| Terminal Finish | TIN |
| Power Rating | 2.5W |
| Max Power Dissipation | 1.25W |
| Terminal Position | SINGLE |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Current Rating | 5A |
| Base Part Number | IPS7091PBF |
| Number of Outputs | 1 |
| Output Voltage | 35V |
| Max Output Current | 5A |
| Operating Supply Voltage | 65V |
| Voltage | 5.5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4V |
| Nominal Supply Current | 2.5mA |
| Current | 1.5A |
| Output Configuration | High Side |
| Power Dissipation | 1.25W |
| Output Current | 1.5A |
| Input Type | Non-Inverting |
| Clamping Voltage | 70V |
| Output Current per Channel | 1.5A |
| Rise Time | 7μs |
| Fall Time (Typ) | 6 μs |
| Nominal Input Voltage | 5.5V |
| Voltage - Load | 6V~35V |
| Input Current | 40μA |
| Output Peak Current Limit-Nom | 5A |
| Rds On (Typ) | 80m Ω |
| Drain to Source Resistance | 80mOhm |
| Built-in Protections | OVER CURRENT; THERMAL |
| Height | 9.02mm |
| Length | 10.668mm |
| Width | 4.826mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
IPS7091PBF Overview
It is packaged in the form of a Tube.Package TO-220-5 contains it.The LED driver is mounted as Through Hole.It is recommended that the temperature be set to -40°C~150°C for reliable performance.There are 1 outputs available on this lighting driver.The IPS7091PBF family consists of this type.There are 5 terminations in it.The operation is performed through the 5 pins.The LED driving board has a total of 1 functions.To meet the operation criteria, the maximum output current drops to 5A.With a supply voltage of 14V, high efficiency is possible.It is mounted in the way of Through Hole.Lighting drivers with 80mOhm resistance are used.When this is the case, the output current is set to 1.5A.In order to optimize the efficiency of the supply voltage, it should be set to 65V.It can handle a maximum voltage of 5.5VV.A supply voltage of 4VV is sufficient for it to work.In the case of this electrical component, it is classified as Switch.
IPS7091PBF Features
Supplied from 14V
Resistance of 80mOhm
IPS7091PBF Applications
There are a lot of Infineon Technologies IPS7091PBF Power Switches ICs applications.
- Portable Devices
- Smart Phones, Feature Phones
- Various applications equipped with buttons
- Portable/Handheld Devices
- Wireless Headsets
- Solid-State Drives
- Low Voltage I/O System Power
- Wireless Modem Data Cards
- USB Protection
- USB Power Distribution
