IPS7091STRLPBF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-5, D2Pak (4 Leads + Tab), TO-263BB |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C |
| Packaging | Cut Tape (CT) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| Type | Switch |
| Resistance | 80mOhm |
| Terminal Finish | TIN |
| Power Rating | 2.5W |
| Max Power Dissipation | 1.25W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Current Rating | 1.5A |
| Base Part Number | IPS7091SPBF |
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 5.5V |
| Voltage | 5.5V |
| Interface | On/Off |
| Nominal Supply Current | 2.5mA |
| Current | 1.5A |
| Output Configuration | High Side |
| Power Dissipation | 1.25W |
| Output Current | 1.5A |
| Max Supply Current | 2.5mA |
| Input Type | Non-Inverting |
| Clamping Voltage | 70V |
| Output Current per Channel | 1.5A |
| Voltage - Load | 6V~35V |
| Fault Protection | Over Temperature |
| Output Peak Current Limit-Nom | 5A |
| Rds On (Typ) | 80m Ω |
| Drain to Source Resistance | 80mOhm |
| Built-in Protections | OVER CURRENT; THERMAL |
| Height | 4.826mm |
| Length | 10.668mm |
| Width | 11.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
IPS7091STRLPBF Overview
Cut Tape (CT) is how it's packaged.There is a TO-263-5, D2Pak (4 Leads + Tab), TO-263BB package that includes it.The mounting type of the LED driver is Surface Mount.Keeping the temperature at -40°C~150°C ensures reliable operation.By default, it is set to output 1.It belongs to the family IPS7091SPBF.A total of 4 terminations can be found in it.For operation, we use the 5 pins.It is important to note that the LED driving board has 1 functions.The maximum output current must drop to 1.5A to meet the operation criteria.A supply voltage of 14V leads to high efficiency.This lighting driver is mounted in the way of Surface Mount.There is 80mOhm resistance on the LED driver.This results in a 1.5A output current.It is recommended to set the supply voltage to 5.5V for optimum efficiency.It operates at a maximum current of 2.5mA.Electrical components classified as Switch belong to this category.
IPS7091STRLPBF Features
Supplied from 14V
Resistance of 80mOhm
IPS7091STRLPBF Applications
There are a lot of Infineon Technologies IPS7091STRLPBF Power Switches ICs applications.
- Hard Disk Drives
- Solid-State Drives
- HDD and SSD
- Smart Phones, Feature Phones
- Wireless Modem Data Cards
- Various applications equipped with buttons
- HDD, SSD
- Portable GPS Device
- USB3.1 Power Delivery
- Gaming
