IR1167BSTRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -25°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | SmartRectifier™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 4Ohm |
| Terminal Finish | Matte Tin (Sn) - with Nickel (Ni) barrier |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 970mW |
| Voltage - Supply | 12V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Frequency | 500kHz |
| Base Part Number | IR1167BSPBF |
| Number of Outputs | 1 |
| Output Voltage | 200V |
| Max Output Current | 7A |
| Nominal Supply Current | 80mA |
| Power Dissipation | 970mW |
| Output Current | 7A |
| Max Supply Current | 80mA |
| Propagation Delay | 60 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 60 ns |
| Topology | Flyback |
| Rise Time | 180ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 18ns 10ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Output Peak Current Limit-Nom | 7A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 7A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 2V 2.15V |
| Turn Off Time | 0.065 μs |
| Height | 1.4986mm |
| Length | 4.9784mm |
| Width | 3.9878mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IR1167BSTRPBF Overview
For greater flexibility, its 8-SOIC (0.154, 3.90mm Width) package is used.Gate drivers is package in Tape & Reel (TR) case.Surface Mount is mounted in the way.In the absence of a 12V~18V supply voltage, it can demonstrate its superiority.Gate type N-Channel MOSFET is designed for it.-25°C~125°C TJ is the allowed temperature range for this device.Mosfet driver accepts input of type Non-Inverting.Mosfet driver consists of 8 terminations as Mosfet drivers foundation.There are various related parts under its base part number IR1167BSPBF.Surface Mount is the way it takes to mount the device.The pins are configured with 8 when designing the chip.The device is specifically designed to function with a supply voltage of 15V V.The interface IC of the device is BUFFER OR INVERTER BASED MOSFET DRIVER.In the maximum case, the output current can be limited to 7A.There are several useful electronic components in this subcategory of MOSFET Drivers.Based on its basis, it integrates 1 outputs.The output current can be set to 7A.Based on its maximum power dissipation of 970mW, it is clear that it is capable of transferring and conducting power loss without overheating.Mosfet gate drivers is recommended to keep the supply current at 80mA to ensure greater stabilMosfet gate driversy.When this voltage is produced, it is marked as 200V.In the SmartRectifier? series, this gate driver is included.Improved efficiency can be obtained based on the frequency of 500kHz.Resistance 4Ohm is used for operation.
IR1167BSTRPBF Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
8 pins
Maximum power dissipation of 970mW
Operating with the supply voltage of SmartRectifier?
Resistance of 4Ohm
IR1167BSTRPBF Applications
There are a lot of Infineon Technologies IR1167BSTRPBF gate drivers applications.
- Active Clamp Flyback or Forward and Synchronous Rectifier
- High-speed communications
- Smart Phones
- Telecom switch mode power supplies
- Motor Drives
- General Purpose 3-Phase Inverter
- Industrial motor drives - compact, standard, premium, servo drives
- Commercial air-conditioning (CAC)
- Motor Control
- Motor Controls
