IR2010PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.6W |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | IR2010PBF |
| Number of Outputs | 2 |
| Output Voltage | 20V |
| Max Output Current | 3A |
| Power Supplies | 15V |
| Nominal Supply Current | 230μA |
| Power Dissipation | 1.6W |
| Output Current | 3A |
| Max Supply Current | 230μA |
| Propagation Delay | 135 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 15 ns |
| Reference Voltage | 200V |
| Rise Time | 20ns |
| Fall Time (Typ) | 25 ns |
| Turn-Off Delay Time | 15 ns |
| Rise / Fall Time (Typ) | 10ns 15ns |
| Channel Type | Independent |
| Turn On Time | 0.135 μs |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 6V 9.5V |
| Turn Off Time | 0.105 μs |
| Height | 4.9276mm |
| Length | 20.1676mm |
| Width | 7.11mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IR2010PBF Overview
A higher degree of flexibility is achieved by adopting its 14-DIP (0.300, 7.62mm) package.Tube is the packaging method.Its recommended mounting way is Through Hole.When the supply voltage is set to 10V~20V, it can demonstrate its superiority.This device is designed with a IGBT, N-Channel MOSFET gate type.There is a temperature range for this device of -40°C~150°C TJ.Input type of Non-Inverting is used.Mosfet driver is based on 14 terminations.There are numerous related parts listed under its base part number IR2010PBF.In this case, Through Hole indicates how the device is to be mounted.Mosfet driver is configured wMosfet driverh 14 pins when designing.Specification is for 15V supply voltage operation.As a maximum, there is 3A limit to the output current.There are several useful electronic components found in its subcategory of MOSFET Drivers.Mosfet driver is based on a basis of 2 outputs that have been integrated.The device is capable of delivering a current of 3A.Its maximum power dissipation of 1.6W shows its power loss capacity without overheating.In order to ensure greater stability, it is recommended to keep the supply current at 230μA.Using its power supply of 15V, it provides solutions to diverse power supply problems.Mosfet gate drivers outputs 20V as voltage.
IR2010PBF Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel MOSFET
14 pins
Maximum power dissipation of 1.6W
IR2010PBF Applications
There are a lot of Infineon Technologies IR2010PBF gate drivers applications.
- High-speed communications
- Telecom switch mode power supplies
- Topologies
- Uninterruptible Power Supplies (UPS)
- Motor Drives
- A/D drivers
- DC/DC converters
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Active filtering
- Motor Control
