IR2086STRPBF
| Parameters | |
|---|---|
| High Side Driver | YES |
| Turn Off Time | 0.03 μs |
| High Side Voltage - Max (Bootstrap) | 100V |
| Height | 1.4986mm |
| Length | 9.9568mm |
| Width | 3.9878mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 143.703733mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 1W |
| Voltage - Supply | 9.5V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 1.27mm |
| Frequency | 500kHz |
| Base Part Number | IR2086SPBF |
| Max Output Current | 1.2A |
| Operating Supply Current | 1mA |
| Power Dissipation | 1W |
| Output Current | 1.2A |
| Max Supply Current | 1mA |
| Input Type | RC Input Circuit |
| Rise Time | 60ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 40ns 20ns |
| Interface IC Type | FULL BRIDGE BASED MOSFET DRIVER |
| Channel Type | Synchronous |
| Number of Drivers | 4 |
| Turn On Time | 0.06 μs |
| Output Peak Current Limit-Nom | 1.2A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.2A 1.2A |
IR2086STRPBF Overview
A higher level of flexibility is provided by its 16-SOIC (0.154, 3.90mm Width) package.There is a package in the form of Tape & Reel (TR).This device is equipped with 4 drivers for its configuration.In the direction of Surface Mount, gate drivers is mounted.When the supply voltage is set to 9.5V~15V, it can demonstrate its superiority.This gate type has a N-Channel MOSFET design.In this device, temperatures must not exceed -40°C~125°C TJ.RC Input Circuit is used as the input type in this program.Mosfet driver is based on 16 terminations.Under its base part number IR2086SPBF, various related parts can be found.In this case, Surface Mount indicates how the device is to be mounted.The pins are configured with 16 when designing the chip.The device is specifically designed to operate at 12V volts.In this case, FULL BRIDGE BASED MOSFET DRIVER serves as the interface IC.There is an output current limit of 1.2A for this device.Maximum (Bootstrap) voltage is 100V.The device is capable of delivering a current of 1.2A.Its maximum power dissipation of 1W shows its power loss capacity without overheating.To ensure high stability, the supply current should be kept at 1mA.With a voltage of 1mA, it operates with a constant current.The frequency of 500kHz can be adjusted in order to improve efficiency.
IR2086STRPBF Features
Embedded in the Tape & Reel (TR) package
4 drivers
Employing a gate type of N-Channel MOSFET
16 pins
High-side voltage - Max (Bootstrap) of 100V
Maximum power dissipation of 1W
IR2086STRPBF Applications
There are a lot of Infineon Technologies IR2086STRPBF gate drivers applications.
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Power factor correction (PFC) circuits
- White Goods - Air Conditioner, Washing Machine,
- Solar inverters
- Isolated Supplies for Motor Control
- Motor Controls
- Pulse transformer drivers
- Head-up and Head mounted displays
- RGB applications
- AC-DC Inverters
