IR2103PBF
| Parameters | |
|---|---|
| Max Output Voltage | 20V |
| Rise Time | 170ns |
| Fall Time (Typ) | 60 ns |
| Turn-Off Delay Time | 220 ns |
| Min Output Voltage | 10V |
| Rise / Fall Time (Typ) | 100ns 50ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 210mA 360mA |
| Logic Voltage - VIL, VIH | 0.8V 3V |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 4.9276mm |
| Length | 10.8966mm |
| Width | 7.11mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Supplier Device Package | 8-PDIP |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | Through Hole |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 1W |
| Voltage - Supply | 10V~20V |
| Base Part Number | IR2103PBF |
| Number of Outputs | 2 |
| Output Voltage | 620V |
| Max Output Current | 360mA |
| Number of Channels | 2 |
| Max Supply Voltage | 20V |
| Min Supply Voltage | 10V |
| Power Dissipation | 1W |
| Output Current | 210mA |
| Propagation Delay | 60 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 820 ns |
IR2103PBF Overview
The 8-DIP (0.300, 7.62mm) package provides greater flexibility.Gate drivers is package in Tube case.2 drivers are incorporated for its configuration.Its recommended mounting way is Through Hole.WGate driversh a 10V~20V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.Gate type IGBT, N-Channel MOSFET has been used in its design.This device is allowed to operate in a temperature range of -40°C~150°C TJ.Inverting, Non-Inverting is used as its input type.Many related parts can be found under its base part number IR2103PBF.The device is mounted with Through Hole.The pins are configured with 8 when designing the chip.Mosfet driver is possible for the output current to be as low as 360mA.Maximum (Bootstrap) voltage is 600V.In terms of its basis, there are 2 outputs integrated.The device is capable of delivering a current of 210mA.Operating temperatures cannot exceed 125°C.There is a minimum operating temperature of -40°C.Its maximum power dissipation of 1W shows its power loss capacity without overheating.20V is its maximum operating voltage.A supply voltage of 10V is the minimum value required to operate the device.Mosfet gate drivers outputs 620V as voltage.Mosfet driver ic has a configuration of 2 channels.In this case, 20V should be set as the maximum output voltage.
IR2103PBF Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 1W
IR2103PBF Applications
There are a lot of Infineon Technologies IR2103PBF gate drivers applications.
- Refrigerator
- Isolated Supplies for controller area network (CAN),
- Topologies
- Broadcast equipment
- High-voltage isolated DC-DC converters
- High current laser/LED systems
- Telecom switch mode power supplies
- Portable Media Players
- Portable computers
- serial peripheral interface (SPI), I2C
