IR2104SPBF
| Parameters | |
|---|---|
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 625mW |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | IR2104SPBF |
| Number of Outputs | 2 |
| Output Voltage | 10V |
| Max Output Current | 360mA |
| Power Supplies | 15V |
| Nominal Supply Current | 150μA |
| Power Dissipation | 625mW |
| Output Current | 130mA |
| Max Supply Current | 270μA |
| Propagation Delay | 820 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 60 ns |
| Max Output Voltage | 20V |
| Rise Time | 170ns |
| Fall Time (Typ) | 90 ns |
| Turn-Off Delay Time | 60 ns |
| Min Output Voltage | 10V |
| Rise / Fall Time (Typ) | 100ns 50ns |
| Channel Type | Synchronous |
| Output Peak Current Limit-Nom | 0.36A |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 210mA 360mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 3V |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 1.4986mm |
| Length | 4.9784mm |
| Width | 3.9878mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead, Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
IR2104SPBF Overview
There is greater flexibility with the 8-SOIC (0.154, 3.90mm Width) package.There is a package in the form of Tube.The device is mounted in the direction of Surface Mount.WGate driversh a 10V~20V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.This device is designed with a IGBT, N-Channel MOSFET gate type.This device can operate at temperatures up to -40°C~150°C TJ.A type of Non-Inverting is used for input in this program.Its configuration is based on a total of 8 terminations.Mosfet driver contains a variety of related parts under Mosfet drivers base part number IR2104SPBF.Mounting the device requires Surface Mount.At the time of design, it is configured with 8 pins.A voltage of 15V is required for its operation.As a maximum, there is 360mA limit to the output current.Mosfet driver includes a number of useful electronic components in Mosfet drivers subcategory of MOSFET Drivers.Maximum (Bootstrap) voltage is 600V.The basis of this system consists of 2 outputs.The output current of this device can be set to 130mA.Its maximum power dissipation of 625mW shows its power loss capacity without overheating.The supply current should be kept at 270μA to ensure higher stability.With its power supplies of 15V, it solves the power supply problems for diverse applications.When this voltage is produced, it is marked as 10V.Mosfet driver ic is recommended to keep the maximum output voltage at 20V.
IR2104SPBF Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 625mW
IR2104SPBF Applications
There are a lot of Infineon Technologies IR2104SPBF gate drivers applications.
- Welding
- A/D drivers
- UPS systems
- High current laser/LED systems
- 3-Phase Motor Inverter Driver
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Broadcast equipment
- Line drivers
- Portable Navigation Devices
- High frequency line drivers
