IR21064STRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 1996 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | IR21064SPBF |
| Qualification Status | Not Qualified |
| Max Output Current | 350mA |
| Power Supplies | 15V |
| Power Dissipation | 1W |
| Output Current | 200mA |
| Propagation Delay | 300 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 300 ns |
| Rise Time | 220ns |
| Fall Time (Typ) | 80 ns |
| Turn-Off Delay Time | 280 ns |
| Rise / Fall Time (Typ) | 150ns 50ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Supply Voltage1-Nom | 15V |
| Driven Configuration | High-Side or Low-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 200mA 350mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.9V |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 1.4986mm |
| Length | 8.7376mm |
| Width | 3.9878mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IR21064STRPBF Overview
The 14-SOIC (0.154, 3.90mm Width) package provides greater flexibility.There is a package in the form of Tape & Reel (TR).2 drivers are incorporated for its configuration.Ideally, it should be mounted in the direction of Surface Mount.A supply voltage of 10V~20V demonstrates its superiority.A gate type of IGBT, N-Channel MOSFET has been used in its design.For this device, the temperature range is -40°C~150°C TJ.Non-Inverting is used as its input type.As a result of its configuration, it contains a maximum of 14 terminations.Under its base part number IR21064SPBF, various related parts can be found.Mosfet driver is mounted using Surface Mount.Mosfet driver is configured wMosfet driverh 14 pins when designing.The device is specifically designed to function with a supply voltage of 15V V.As its interface IC, HALF BRIDGE BASED MOSFET DRIVER is being employed.As a maximum, there is 350mA limit to the output current.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.Max (Bootstrap) can be as high as 600V.This device is capable of delivering 200mA current.This device has a maximum power dissipation of 1W, indicating that it is capable of reducing power loss without overheating.Based on its power supplies of 15V, it solves the problem of power supply failure for a variety of applications.
IR21064STRPBF Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
14 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 1W
IR21064STRPBF Applications
There are a lot of Infineon Technologies IR21064STRPBF gate drivers applications.
- UPS systems
- Line drivers
- serial peripheral interface (SPI), I2C
- Commercial and agricultural vehicles (CAV)
- Solar power supplies
- PCMCIA applications
- Smart Phones
- A/D drivers
- Solar inverters
- Power factor correction (PFC) circuits
