IR2106PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Additional Feature | FLOATING LOAD DRIVER; UNDER VOLTAGE LOCKOUT CIRCUIT |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | IR2106PBF |
| Number of Outputs | 2 |
| Output Voltage | 620V |
| Max Output Current | 350mA |
| Power Supplies | 15V |
| Power Dissipation | 1W |
| Output Current | 200mA |
| Propagation Delay | 300 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 300 ns |
| Max Output Voltage | 20V |
| Rise Time | 220ns |
| Fall Time (Typ) | 80 ns |
| Turn-Off Delay Time | 280 ns |
| Min Output Voltage | 10V |
| Rise / Fall Time (Typ) | 150ns 50ns |
| Channel Type | Independent |
| Turn On Time | 0.3 μs |
| Output Peak Current Limit-Nom | 0.35A |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 200mA 350mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.9V |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 4.9276mm |
| Length | 10.8966mm |
| Width | 7.11mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IR2106PBF Overview
A higher level of flexibility is provided by its 8-DIP (0.300, 7.62mm) package.Gate drivers is packaged in the way of Tube.Through Hole is mounted in the way.WGate driversh a 10V~20V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.A gate type of IGBT, N-Channel MOSFET has been used in its design.Mosfet driver is possible to use this device at temperatures as low as -40°C~150°C TJ.Non-Inverting is used as the input type.8 terminations constitute its foundation.Mosfet driver is possible to find various related parts under Mosfet drivers base part number IR2106PBF.The mount method is Through Hole.Mosfet driver is configured wMosfet driverh 8 pins when designing.In addition, it is specifically designed to operate with a supply voltage of 15V.In the maximum case, the output current can be limited to 350mA.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.High-side voltage - Max (Bootstrap) can be as low as 600V.For its basis, 2 outputs are integrated.The output current of this device can be set to 200mA.1W dissipates maximum power without overheating, showing its maximum capability to transfer and conduct power loss.Based on its power supplies of 15V, it solves the problem of power supply failure for a variety of applications.As a result, a voltage of 620V is produced.Mosfet gate drivers is also possible to provide FLOATING LOAD DRIVER; UNDER VOLTAGE LOCKOUT CIRCUIT based on a unique technology in this field.At maximum output voltage, 20V should be used.
IR2106PBF Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 1W
FLOATING LOAD DRIVER; UNDER VOLTAGE LOCKOUT CIRCUIT
IR2106PBF Applications
There are a lot of Infineon Technologies IR2106PBF gate drivers applications.
- Uninterruptible Power Supplies (UPS)
- Motor Controls
- 3-Phase Motor Inverter Driver
- Solar inverters
- serial peripheral interface (SPI), I2C
- High-voltage isolated DC-DC converters
- Digitally controlled power supplies
- Portable Navigation Devices
- Video amplifiers
- Refrigerator
