IR2108PBF
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Additional Feature | FLOATING LOAD DRIVER; UNDER VOLTAGE LOCKOUT CIRCUIT |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | IR2108PBF |
| Number of Outputs | 2 |
| Output Voltage | 620V |
| Max Output Current | 350mA |
| Power Supplies | 15V |
| Nominal Supply Current | 1.6mA |
| Power Dissipation | 1W |
| Output Current | 200mA |
| Max Supply Current | 1.6mA |
| Propagation Delay | 300 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 30 ns |
| Rise Time | 220ns |
| Fall Time (Typ) | 80 ns |
| Turn-Off Delay Time | 200 ns |
| Rise / Fall Time (Typ) | 150ns 50ns |
| Channel Type | Independent |
| Turn On Time | 0.3 μs |
| Output Peak Current Limit-Nom | 0.35A |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 200mA 350mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.9V |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 4.9276mm |
| Length | 10.8966mm |
| Width | 7.11mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
IR2108PBF Overview
The 8-DIP (0.300, 7.62mm) package provides greater flexibility.There is a package in the form of Tube.Its recommended mounting way is Through Hole.When the supply voltage is set to 10V~20V, it can demonstrate its superiority.Gate type IGBT, N-Channel MOSFET is designed for it.There is a temperature range for this device of -40°C~150°C TJ.Mosfet driver accepts input of type Non-Inverting.The configuration starts with 8 terminations.There are various related parts under its base part number IR2108PBF.Mosfet driver is mounted using the Through Hole method.A total of 8 pins are available on the device.With a supply voltage of 15V, it is designed to operate.Mosfet driver is possible to achieve a maximum output current of 350mA.Mosfet driver includes a number of useful electronic components in Mosfet drivers subcategory of MOSFET Drivers.Ideally, the high-side voltage should not exceed 600V.Mosfet driver is based on a basis of 2 outputs that have been integrated.This device supports a current output of 200mA at the output.Using 1W as an example, the maximum power dissipation shows how well it is able to transfer and conduct power loss without becoming overheated.If you want a stable supply current, you should keep it at 1.6mA.Using its power supply of 15V, it provides solutions to diverse power supply problems.In this case, the voltage is 620V.Mosfet gate drivers is also possible to provide FLOATING LOAD DRIVER; UNDER VOLTAGE LOCKOUT CIRCUIT based on a unique technology in this field.
IR2108PBF Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 1W
FLOATING LOAD DRIVER; UNDER VOLTAGE LOCKOUT CIRCUIT
IR2108PBF Applications
There are a lot of Infineon Technologies IR2108PBF gate drivers applications.
- UPS systems
- 3-Phase Motor Inverter Driver
- Motor controllers
- High-speed communications
- General Purpose 3-Phase Inverter
- Isolated Gate Driver Supplies
- Commercial air-conditioning (CAC)
- Industrial Modules
- serial peripheral interface (SPI), I2C
- High current laser/LED systems
