IR2110-1PBF
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm), 13 Leads |
| Number of Pins | 14 |
| Supplier Device Package | 14-PDIP |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2005 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 1.6W |
| Voltage - Supply | 3.3V~20V |
| Base Part Number | IR2110-1PBF |
| Number of Outputs | 2 |
| Max Output Current | 2A |
| Max Supply Voltage | 20V |
| Min Supply Voltage | 10V |
| Nominal Supply Current | 340μA |
| Power Dissipation | 1.6W |
| Output Current | 2.5A |
| Max Supply Current | 340μA |
| Propagation Delay | 150 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 10 ns |
| Rise Time | 35ns |
| Fall Time (Typ) | 25 ns |
| Turn-Off Delay Time | 10 ns |
| Rise / Fall Time (Typ) | 25ns 17ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| Logic Voltage - VIL, VIH | 6V 9.5V |
| High Side Voltage - Max (Bootstrap) | 500V |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
IR2110-1PBF Overview
The 14-DIP (0.300, 7.62mm), 13 Leads package provides greater flexibility.Tube is the form of the package.This configuration includes 2 drivers.There is a mounting bracket in the way of Through Hole.Using a 3.3V~20V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.A gate type of IGBT, N-Channel MOSFET is used in its design.For this device, the temperature range is -40°C~150°C TJ.Non-Inverting is used as its input type.Under its base part number IR2110-1PBF, various related parts can be found.Mosfet driver is mounted using the Through Hole method.The pins are configured with 14 when designing the chip.There is a maximum output current of 2A that can be achieved.Mosfet driver is possible for the high-side voltage - Max (Bootstrap) to be as low as 500V.The basis of this model has 2 outputs integrated.The output current supported by the device is 2.5A.125°C is the maximum operating temperature that can be tolerated.Temperatures below -40°C are allowed as the minimum.Its maximum power dissipation of 1.6W shows its power loss capacity without overheating.To maintain higher stability, the supply current should always be 340μA.This device operates at its maximum voltage of 20V.Its minimum operating voltage is 10V.
IR2110-1PBF Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
14 pins
High-side voltage - Max (Bootstrap) of 500V
Maximum power dissipation of 1.6W
IR2110-1PBF Applications
There are a lot of Infineon Technologies IR2110-1PBF gate drivers applications.
- Line drivers
- Power factor correction (PFC) circuits
- PCMCIA applications
- Video amplifiers
- LCD/LCoS/DLP portable and embedded pico projectors
- High frequency line drivers
- Active Clamp Flyback or Forward and Synchronous Rectifier
- High-voltage isolated DC-DC converters
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Portable Navigation Devices
