IR2110-2PBF
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm), 14 Leads |
| Number of Pins | 14 |
| Supplier Device Package | 16-PDIP |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2005 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 1.6W |
| Voltage - Supply | 3.3V~20V |
| Base Part Number | IR2110-2PBF |
| Number of Outputs | 2 |
| Max Output Current | 2A |
| Max Supply Voltage | 20V |
| Min Supply Voltage | 10V |
| Nominal Supply Current | 340μA |
| Power Dissipation | 1.6W |
| Output Current | 2A |
| Max Supply Current | 340μA |
| Propagation Delay | 150 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 10 ns |
| Rise Time | 35ns |
| Fall Time (Typ) | 25 ns |
| Turn-Off Delay Time | 10 ns |
| Rise / Fall Time (Typ) | 25ns 17ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| Logic Voltage - VIL, VIH | 6V 9.5V |
| High Side Voltage - Max (Bootstrap) | 500V |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
IR2110-2PBF Overview
The 16-DIP (0.300, 7.62mm), 14 Leads package offers greater flexibility.A packaging method of Tube is indicated.For its configuration, it incorporates 2 drivers.Through Hole is mounted in the way.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 3.3V~20V.Gate type IGBT, N-Channel MOSFET is designed for it.Mosfet driver is possible to use this device at temperatures as low as -40°C~150°C TJ.Mosfet driver uses Non-Inverting as Mosfet drivers input type.Mosfet driver is possible to find various related parts under Mosfet drivers base part number IR2110-2PBF.Devices are mounted by Through Hole.Mosfet driver is configured wMosfet driverh 14 pins when designing.An output current as high as 2A can be achieved at maximum power.A boot strap voltage of 500V is the maximum possible high-side voltage.The basis of this model has 2 outputs integrated.An output current of 2A is supported.There is a maximum acceptable operating temperature of 125°C.Temperatures below -40°C are allowable as a minimum.Using 1.6W as an example, the maximum power dissipation shows how well it is able to transfer and conduct power loss without becoming overheated.To maintain higher stability, the supply current should always be 340μA.When the supply voltage is 20V, it is at its maximum operation.This device is designed to operate with a voltage of 10V.
IR2110-2PBF Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
14 pins
High-side voltage - Max (Bootstrap) of 500V
Maximum power dissipation of 1.6W
IR2110-2PBF Applications
There are a lot of Infineon Technologies IR2110-2PBF gate drivers applications.
- Motor controllers
- General Purpose 3-Phase Inverter
- Head-up and Head mounted displays
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Line drivers
- Portable computers
- High power buffers
- High current laser/LED systems
- High-speed communications
- Uninterruptible Power Supplies (UPS)
