IR2110STR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Packaging | Tape and Reel |
| Published | 2012 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Max Output Current | 2A |
| Operating Supply Voltage | 15V |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 20V |
| Min Supply Voltage | 10V |
| Power Dissipation | 1.25W |
| Propagation Delay | 150 ns |
| Turn On Delay Time | 10 ns |
| Rise Time | 35ns |
| Fall Time (Typ) | 25 ns |
| Turn-Off Delay Time | 10 ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.15 μs |
| Output Peak Current Limit-Nom | 2.5A |
| High Side Driver | YES |
| Length | 10.3mm |
| Width | 7.5mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
IR2110STR Overview
A higher degree of flexibility is achieved by adopting its SOIC package.A packaging method of Tape and Reel is used.The configuration is supported by 2 drivers.The configuration starts with 16 terminations.In this case, Surface Mount indicates how the device is mounted.In the device, there are 16 pins.The device is specifically designed to function with a supply voltage of 15V V.The interface chip of the system is HALF BRIDGE BASED MOSFET DRIVER.As a maximum, there is 2A limit to the output current.Within this subcategory of MOSFET Drivers, there are several useful electronic components.16 pins are present on the component.125°C is the maximum operating temperature that can be tolerated.Temperatures below -40°C are allowed as the minimum.This device operates at its maximum voltage of 20V.In order for it to operate, the supply voltage of 10V must be maintained.Mosfet gate drivers is recommended that the operating voltage of the supply be set at 15V.
IR2110STR Features
Embedded in the Tape and Reel package
2 drivers
16 pins
IR2110STR Applications
There are a lot of International Rectifier IR2110STR gate drivers applications.
- General Purpose 3-Phase Inverter
- Industrial Motor Inverter - Power Tools, Robotics
- Isolated switch mode power supplies (SMPS)
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Welding
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Solar inverters
- Portable Media Players
- Power factor correction (PFC) circuits
- Uninterruptible Power Supplies (UPS)
