IR2111STRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 1996 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 625mW |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | IR2111SPBF |
| Output Voltage | 20V |
| Max Output Current | 500mA |
| Power Supplies | 15V |
| Nominal Supply Current | 180μA |
| Power Dissipation | 625mW |
| Output Current | 500mA |
| Max Supply Current | 180μA |
| Propagation Delay | 950 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 950 ns |
| Max Output Voltage | 20V |
| Rise Time | 130ns |
| Fall Time (Typ) | 65 ns |
| Turn-Off Delay Time | 180 ns |
| Min Output Voltage | 10V |
| Rise / Fall Time (Typ) | 80ns 40ns |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Turn On Time | 0.95 μs |
| Output Peak Current Limit-Nom | 0.5A |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 250mA 500mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 8.3V 12.6V |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 1.4986mm |
| Length | 4.9784mm |
| Width | 3.9878mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IR2111STRPBF Overview
Its 8-SOIC (0.154, 3.90mm Width) package provides greater flexibility.The packaging method is indicated by Tape & Reel (TR).Configuration is based on 2 drivers.Its recommended mounting way is Surface Mount.In the absence of a 10V~20V supply voltage, its superiority can be demonstrated.A gate type of IGBT, N-Channel MOSFET has been used in its design.This device is allowed to operate in a temperature range of -40°C~150°C TJ.Mosfet driver uses Non-Inverting as Mosfet drivers input type.It's configured with 8 terminations.Numerous related parts can be found under its base part number IR2111SPBF.In this case, Surface Mount indicates how the device is to be mounted.A total of 8 pins are available on the device.In addition, it is specifically designed to operate with a supply voltage of 15V.There is an output current limit of 500mA for this device.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.Mosfet driver is possible to set the high-side voltage - Max (Bootstrap) to 600V.The output current of this device can be set to 500mA.Based on the maximum power dissipation of 625mW, it is clear that it is capable of transferring and conducting power losses without becoming overheated.To increase stability, keep the supply current at 180μA.With its 15V power supply, it provides power for diverse applications.In this case, the voltage output is 20V.At maximum output voltage, 20V should be used.
IR2111STRPBF Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 625mW
IR2111STRPBF Applications
There are a lot of Infineon Technologies IR2111STRPBF gate drivers applications.
- Video amplifiers
- AC-DC Inverters
- Active filtering
- Isolated switch mode power supplies (SMPS)
- Telecom switch mode power supplies
- serial peripheral interface (SPI), I2C
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- PCMCIA applications
- Commercial and agricultural vehicles (CAV)
- Digitally controlled power supplies
