IR2112SPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-SOIC |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Termination | SMD/SMT |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 1.25W |
| Voltage - Supply | 10V~20V |
| Base Part Number | IR2112SPBF |
| Number of Outputs | 2 |
| Output Voltage | 20V |
| Max Output Current | 500mA |
| Operating Supply Voltage | 15V |
| Number of Channels | 2 |
| Max Supply Voltage | 20V |
| Min Supply Voltage | 10V |
| Nominal Supply Current | 180μA |
| Power Dissipation | 1.25W |
| Output Current | 250mA |
| Max Supply Current | 180μA |
| Propagation Delay | 180 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 30 ns |
| Max Output Voltage | 20V |
| Rise Time | 130ns |
| Fall Time (Typ) | 65 ns |
| Turn-Off Delay Time | 30 ns |
| Min Output Voltage | 10V |
| Rise / Fall Time (Typ) | 80ns 40ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Driven Configuration | High-Side or Low-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 250mA 500mA |
| Logic Voltage - VIL, VIH | 6V 9.5V |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 2.35mm |
| Length | 10.4902mm |
| Width | 7.5946mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead, Lead Free |
IR2112SPBF Overview
A higher level of flexibility is provided by its 16-SOIC (0.295, 7.50mm Width) package.There is a package in the form of Tube.This configuration includes 2 drivers.The device is mounted in the direction of Surface Mount.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 10V~20V supply voltage.Gate drivers is designed wGate driversh a IGBT, N-Channel MOSFET gate.Temperature range -40°C~150°C TJ is allowed for this device.Mosfet driver uses Non-Inverting as Mosfet drivers input type.You will find various related parts under the base part number IR2112SPBF.The device is mounted with Surface Mount.The pins are configured with 16 when designing the chip.There is a maximum output current of 500mA that can be achieved.Maximum (Bootstrap) voltage can be up to 600V.There are 2 outputs integrated for its basis.250mA is the maximum output current supported by the device.Mosfet gate drivers is permissible to operate at a temperature of 125°C.Operating temperatures can be as low as -40°C.This device has a maximum power dissipation of 1.25W, indicating that it is capable of reducing power loss without overheating.For higher stability, the supply current should be kept at 180μA.This device operates at its maximum voltage of 20V.Its minimum operating voltage is 10V.Mosfet gate drivers outputs 20V as voltage.As a rule of thumb, the operating supply voltage should be set to 15V.There are 2 channels configured for operation.At maximum output voltage, 20V should be used.
IR2112SPBF Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
16 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 1.25W
IR2112SPBF Applications
There are a lot of Infineon Technologies IR2112SPBF gate drivers applications.
- Head-up and Head mounted displays
- Welding
- Motor Drives
- RGB applications
- Isolated Supplies for controller area network (CAN),
- Multicolor LED/laser displays
- High-speed communications
- Isolated Gate Driver Supplies
- Video amplifiers
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
