IR2113-1PBF
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm), 13 Leads |
| Number of Pins | 14 |
| Supplier Device Package | 14-PDIP |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2005 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 1.6W |
| Voltage - Supply | 3.3V~20V |
| Base Part Number | IR2113-1PBF |
| Number of Outputs | 2 |
| Max Output Current | 2A |
| Max Supply Voltage | 20V |
| Min Supply Voltage | 10V |
| Nominal Supply Current | 340μA |
| Power Dissipation | 1.6W |
| Output Current | 2.5A |
| Max Supply Current | 340μA |
| Propagation Delay | 150 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 ns |
| Input Offset Voltage (Vos) | 600V |
| Rise Time | 35ns |
| Fall Time (Typ) | 25 ns |
| Turn-Off Delay Time | 20 ns |
| Rise / Fall Time (Typ) | 25ns 17ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| Logic Voltage - VIL, VIH | 6V 9.5V |
| High Side Voltage - Max (Bootstrap) | 600V |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
IR2113-1PBF Overview
Its 14-DIP (0.300, 7.62mm), 13 Leads package is adopted for higher flexibility.Tube represents the package.Gate drivers is configured wGate driversh 2 drivers.Its recommended mounting way is Through Hole.Using a 3.3V~20V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.This gate type has a IGBT, N-Channel MOSFET design.Temperature range -40°C~150°C TJ is allowed for this device.Input type of Non-Inverting is used.There are various parts that can be found under its base part number IR2113-1PBF.Devices are mounted by Through Hole.A total of 14 pins are available on the device.Mosfet driver is possible for the output current to be as low as 2A.Ideally, the high-side voltage should not exceed 600V.The basis of this system consists of 2 outputs.An output current of 2.5A is supported.Mosfet gate drivers is permissible to set the operating temperature to 125°C.There is a minimum operating temperature of -40°C.Based on the maximum power dissipation of 1.6W, it is clear that it is capable of transferring and conducting power losses without becoming overheated.In order to ensure greater stability, it is recommended to keep the supply current at 340μA.The supply voltage of 20V is its maximum value for operation.The supply voltage of 10V is its minimum value for operation.
IR2113-1PBF Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
14 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 1.6W
IR2113-1PBF Applications
There are a lot of Infineon Technologies IR2113-1PBF gate drivers applications.
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Solar inverters
- Commercial air-conditioning (CAC)
- DC/DC converters
- Head-up and Head mounted displays
- Industrial Motor Inverter - Power Tools, Robotics
- AC-DC Inverters
- Motor Drives
- Multicolor LED/laser displays
- Refrigerator
