IR2113PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount, Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Integrated Circuit (IC) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.25W |
| Technology | CMOS |
| Voltage - Supply | 3.3V~20V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | IR2113PBF |
| Number of Outputs | 2 |
| Output Voltage | 20V |
| Max Output Current | 2A |
| Operating Supply Voltage | 15V |
| Nominal Supply Current | 340μA |
| Power Dissipation | 1.25W |
| Output Current | 2.5A |
| Max Supply Current | 340μA |
| Propagation Delay | 150 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 ns |
| Max Output Voltage | 20V |
| Reference Voltage | 600V |
| Rise Time | 35ns |
| Fall Time (Typ) | 25 ns |
| Turn-Off Delay Time | 20 ns |
| Min Output Voltage | 10V |
| Rise / Fall Time (Typ) | 25ns 17ns |
| Channel Type | Independent |
| Turn On Time | 0.15 μs |
| Output Peak Current Limit-Nom | 2.5A |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 6V 9.5V |
| Height | 2.35mm |
| Length | 10.4902mm |
| Width | 7.11mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead, Lead Free |
IR2113PBF Overview
The 14-DIP (0.300, 7.62mm) package provides greater flexibility.A packaging method of Tube is used.Ideally, it should be mounted in the direction of Through Hole.When the supply voltage is set to 3.3V~20V, it can demonstrate its superiority.A gate type of IGBT, N-Channel MOSFET has been used in its design.This device is allowed to operate in a temperature range of -40°C~150°C TJ.The input type is Non-Inverting.It's configured with 14 terminations.Numerous related parts are available for its base part number IR2113PBF.Mosfet driver is mounted using Surface Mount, Through Hole.At the time of design, it is configured with 14 pins.In addition, it is specifically designed to operate with a supply voltage of 15V.There is a maximum output current of 2A.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.The basis of this model has 2 outputs integrated.Mosfet gate drivers supports a current output of 2.5A.Its maximum power dissipation of 1.25W also demonstrates its maximum ability to transfer power without overheating.Keeping the supply current at 340μA ensures greater stability.A voltage of 20V is output by this device.During the operation of the system, the voltage of the operating supply should be set to 15V.Mosfet driver ic is recommended to keep the maximum output voltage at 20V.
IR2113PBF Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel MOSFET
14 pins
Maximum power dissipation of 1.25W
IR2113PBF Applications
There are a lot of Infineon Technologies IR2113PBF gate drivers applications.
- Motor controllers
- serial peripheral interface (SPI), I2C
- Industrial motor drives - compact, standard, premium, servo drives
- White Goods - Air Conditioner, Washing Machine,
- High-voltage isolated DC-DC converters
- Active filtering
- Pulse transformer drivers
- Commercial air-conditioning (CAC)
- Isolated Supplies for controller area network (CAN),
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
