IR2118PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | IR2118PBF |
| Number of Outputs | 1 |
| Output Voltage | 620V |
| Max Output Current | 500mA |
| Nominal Supply Current | 50μA |
| Power Dissipation | 1W |
| Output Current | 250mA |
| Max Supply Current | 340μA |
| Propagation Delay | 200 ns |
| Input Type | Inverting |
| Turn On Delay Time | 200 ns |
| Max Output Voltage | 20V |
| Rise Time | 130ns |
| Fall Time (Typ) | 65 ns |
| Turn-Off Delay Time | 180 ns |
| Min Output Voltage | 10V |
| Rise / Fall Time (Typ) | 80ns 40ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Turn On Time | 0.2 μs |
| Output Peak Current Limit-Nom | 0.5A |
| Driven Configuration | High-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 250mA 500mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 6V 9.5V |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 4.9276mm |
| Length | 10.8966mm |
| Width | 7.11mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
IR2118PBF Overview
The 8-DIP (0.300, 7.62mm) package offers greater flexibility.Gate drivers is packaged in the way of Tube.There is a mounting bracket in the way of Through Hole.In the absence of a power supply voltage of 10V~20V V, it is able to demonstrate its superiority.Gate type IGBT, N-Channel MOSFET is designed for it.Temperature range -40°C~150°C TJ is allowed for this device.Mosfet driver accepts input of type Inverting.Mosfet driver is based on 8 terminations.The base part number IR2118PBF refers to a number of related parts.The device is mounted using Through Hole.At the time of design, it is configured with 8 pins.The device is specifically designed to operate at 15V volts.BUFFER OR INVERTER BASED MOSFET DRIVER is employed as its interface IC.As a maximum, there is 500mA limit to the output current.This subcategory of MOSFET Drivers has a number of useful electronic components.Mosfet driver is possible to set the high-side voltage - Max (Bootstrap) to 600V.The basis of this model has 1 outputs integrated.An output current of 250mA is supported.1W dissipates maximum power without overheating, showing its maximum capability to transfer and conduct power loss.To maintain higher stability, the supply current should always be 340μA.A voltage of 620V is output by this device.A maximum voltage of 20V should be maintained for the output voltage.
IR2118PBF Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 1W
IR2118PBF Applications
There are a lot of Infineon Technologies IR2118PBF gate drivers applications.
- Isolated switch mode power supplies (SMPS)
- Dual-Battery Systems
- UPS systems
- Portable Navigation Devices
- A/D drivers
- DC-DC Converters
- LCD/LCoS/DLP portable and embedded pico projectors
- Uninterruptible Power Supplies (UPS)
- Broadcast equipment
- High-voltage isolated DC-DC converters
