IR21271SPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 125Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 625mW |
| Technology | CMOS |
| Voltage - Supply | 9V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | IR21271SPBF |
| Number of Outputs | 1 |
| Output Voltage | 20V |
| Max Output Current | 500mA |
| Nominal Supply Current | 120μA |
| Power Dissipation | 625mW |
| Output Current | 200mA |
| Propagation Delay | 250 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 250 ns |
| Max Output Voltage | 20V |
| Rise Time | 130ns |
| Fall Time (Typ) | 65 ns |
| Turn-Off Delay Time | 200 ns |
| Min Output Voltage | 9V |
| Rise / Fall Time (Typ) | 80ns 40ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Turn On Time | 0.25 μs |
| Output Peak Current Limit-Nom | 0.5A |
| Driven Configuration | High-Side or Low-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 250mA 500mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 3V |
| Turn Off Time | 0.2 μs |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 1.4986mm |
| Length | 4.9784mm |
| Width | 3.9878mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead, Lead Free |
IR21271SPBF Overview
The 8-SOIC (0.154, 3.90mm Width) package offers greater flexibility.Gate drivers is packaged in the way of Tube.Ideally, it should be mounted in the direction of Surface Mount.In the absence of a power supply voltage of 9V~20V V, it is able to demonstrate its superiority.A gate type of IGBT, N-Channel MOSFET has been used in its design.In this device, temperatures must not exceed -40°C~150°C TJ.Non-Inverting is used as its input type.The configuration is based on 8 terminations.Under its base part number IR21271SPBF, various related parts can be found.You mount it with Surface Mount.During design, it is configured with 8 pins.In order to operate, a voltage of 15V has to be applied.The interface chip of the system is BUFFER OR INVERTER BASED MOSFET DRIVER.The maximum output current can amount to 500mA.Its subcategory of MOSFET Drivers contains various useful electronic components.Max (Bootstrap) can be as high as 600V.The basis of the model has 1 outputs integrated.Mosfet driver supports an output current of 200mA.Using 625mW as an example, the maximum power dissipation shows how well it is able to transfer and conduct power loss without becoming overheated.In this case, it produces a voltage of 20V.Resistance 125Ohm is used for operation.In general, it is recommended to keep the maximum output voltage at 20V.
IR21271SPBF Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 625mW
Resistance of 125Ohm
IR21271SPBF Applications
There are a lot of Infineon Technologies IR21271SPBF gate drivers applications.
- Refrigerator
- Active filtering
- Power factor correction (PFC) circuits
- General Purpose 3-Phase Inverter
- High frequency line drivers
- serial peripheral interface (SPI), I2C
- Motor Controls
- Commercial and agricultural vehicles (CAV)
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Isolated Supplies for Motor Control
