IR2127SPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 125Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 625mW |
| Technology | CMOS |
| Voltage - Supply | 12V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | IR2127SPBF |
| Number of Outputs | 1 |
| Output Voltage | 10V |
| Max Output Current | 500mA |
| Operating Supply Voltage | 15V |
| Nominal Supply Current | 120μA |
| Power Dissipation | 625mW |
| Output Current | 200mA |
| Propagation Delay | 250 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 250 ns |
| Max Output Voltage | 20V |
| Rise Time | 130ns |
| Fall Time (Typ) | 65 ns |
| Turn-Off Delay Time | 200 ns |
| Min Output Voltage | 12V |
| Release Time | 150 ns |
| Rise / Fall Time (Typ) | 80ns 40ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Turn On Time | 0.25 μs |
| Output Peak Current Limit-Nom | 0.5A |
| Driven Configuration | High-Side or Low-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 250mA 500mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 3V |
| Turn Off Time | 0.2 μs |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 1.4986mm |
| Length | 4.9784mm |
| Width | 3.9878mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead, Lead Free |
IR2127SPBF Overview
The 8-SOIC (0.154, 3.90mm Width) package provides greater flexibility.A packaging method of Tube is indicated.Its recommended mounting way is Surface Mount.When the supply voltage is 12V~20V it is able to demonstrate its superiority.This gate type has a IGBT, N-Channel MOSFET design.This device is allowed to operate in a temperature range of -40°C~150°C TJ.A type of Non-Inverting is used for input in this program.It's configured with 8 terminations.There are various related parts under its base part number IR2127SPBF.Surface Mount is the way it takes to mount the device.The pins are configured with 8 when designing the chip.Mosfet driver is designed specifically to run on 15V volts of power.Mosfet driver employs an interface chip called BUFFER OR INVERTER BASED MOSFET DRIVER as Mosfet drivers interface chip.Mosfet driver is possible for the output current to be as low as 500mA.There are several useful electronic components found in its subcategory of MOSFET Drivers.High-side voltage - Max (Bootstrap) can be as low as 600V.The basis has 1 integrated outputs.An output current of 200mA is supported.Using 625mW as an example, the maximum power dissipation shows how well it is able to transfer and conduct power loss without becoming overheated.In this case, it produces a voltage of 10V.A voltage of 15V should be set for the operating supply voltage.Mosfet gate drivers operates wMosfet gate driversh a resistance of 125Ohm.Mosfet driver ic is recommended to keep the maximum output voltage at 20V.
IR2127SPBF Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 625mW
Resistance of 125Ohm
IR2127SPBF Applications
There are a lot of Infineon Technologies IR2127SPBF gate drivers applications.
- Video amplifiers
- Industrial Power Supplies
- Solar power supplies
- RGB applications
- Topologies
- Digitally controlled power supplies
- Automotive Applications
- White Goods - Air Conditioner, Washing Machine,
- Power factor correction (PFC) circuits
- AC-DC Inverters
