IR2128PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 125Ohm |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Voltage - Supply | 12V~20V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | IR2128PBF |
| Output Voltage | 620V |
| Max Output Current | 500mA |
| Nominal Supply Current | 120μA |
| Power Dissipation | 1W |
| Output Current | 200mA |
| Propagation Delay | 250 ns |
| Input Type | Inverting |
| Turn On Delay Time | 250 ns |
| Rise Time | 130ns |
| Fall Time (Typ) | 65 ns |
| Turn-Off Delay Time | 200 ns |
| Rise / Fall Time (Typ) | 80ns 40ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.25 μs |
| Output Peak Current Limit-Nom | 0.5A |
| Driven Configuration | High-Side or Low-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 250mA 500mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 3V |
| Turn Off Time | 0.2 μs |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 4.9276mm |
| Length | 10.8966mm |
| Width | 7.112mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IR2128PBF Overview
A higher degree of flexibility is achieved by adopting its 8-DIP (0.300, 7.62mm) package.A packaging method of Tube is indicated.There are 1 drivers installed for this device.There is a mounting bracket in the way of Through Hole.In the absence of a power supply voltage of 12V~20V V, it is able to demonstrate its superiority.There is a gate type of IGBT, N-Channel MOSFET in this design.This device allows temperatures in the range of -40°C~150°C TJ.This program uses the input type of Inverting.The configuration starts with 8 terminations.Many related parts can be found under its base part number IR2128PBF.The device is mounted with Through Hole.When the device is designed, it has 8 pins.With a supply voltage of 15V, it is designed to operate.Mosfet driver is equipped wMosfet driverh an interface chip BUFFER OR INVERTER BASED MOSFET DRIVER.There is a maximum output current of 500mA.There are various useful electronic components in its subcategory MOSFET Drivers.Mosfet driver is possible to set the high-side voltage - Max (Bootstrap) to 600V.The output current supported by the device is 200mA.Based on the maximum power dissipation of 1W, it is clear that it is capable of transferring and conducting power losses without becoming overheated.When this voltage is produced, it is marked as 620V.Device operation requires a resistance of 125Ohm.
IR2128PBF Features
Embedded in the Tube package
1 drivers
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 1W
Resistance of 125Ohm
IR2128PBF Applications
There are a lot of Infineon Technologies IR2128PBF gate drivers applications.
- Broadcast equipment
- DC/DC converters
- Motor Drives
- Uninterruptible Power Supplies (UPS)
- Commercial and agricultural vehicles (CAV)
- Automotive Applications
- High power buffers
- Head-up and Head mounted displays
- Motor Controls
- High frequency line drivers
