IR2130PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.600, 15.24mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 75Ohm |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.5W |
| Technology | MOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | IR2130PBF |
| Number of Outputs | 3 |
| Output Voltage | 300mV |
| Max Output Current | 500mA |
| Operating Supply Voltage | 15V |
| Nominal Supply Current | 30μA |
| Power Dissipation | 1.5W |
| Output Current | 200mA |
| Propagation Delay | 850 ns |
| Input Type | Inverting |
| Turn On Delay Time | 850 ps |
| Rise Time | 125ns |
| Fall Time (Typ) | 55 ns |
| Turn-Off Delay Time | 425 ns |
| Rise / Fall Time (Typ) | 80ns 35ns |
| Channel Type | 3-Phase |
| Number of Drivers | 6 |
| Turn On Time | 0.85 μs |
| Output Peak Current Limit-Nom | 0.5A |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 250mA 500mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Turn Off Time | 0.55 μs |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 5.969mm |
| Length | 39.7256mm |
| Width | 14.73mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
IR2130PBF Overview
There is greater flexibility with the 28-DIP (0.600, 15.24mm) package.Gate drivers is package in Tube case.Configuration is based on 6 drivers.Ideally, it should be mounted in the direction of Through Hole.When the supply voltage is set to 10V~20V, it can demonstrate its superiority.Gate drivers is designed wGate driversh a IGBT, N-Channel MOSFET gate.Temperature range -40°C~150°C TJ is allowed for this device.Mosfet driver accepts input of type Inverting.28 terminations constitute its foundation.Mosfet driver is possible to find various related parts under Mosfet drivers base part number IR2130PBF.In this case, Through Hole indicates how the device is mounted.There are 28 pins available in the device.The device is specifically designed to operate at 15V volts.500mA is the maximum output current.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.Max (Bootstrap) can be as high as 600V.For its basis, 3 outputs are integrated.Mosfet driver supports an output current of 200mA.1.5W dissipates maximum power without overheating, showing its maximum capability to transfer and conduct power loss.As a result, a voltage of 300mV is produced.Setting the operating supply voltage to 15V is recommended.Device operation requires a resistance of 75Ohm.
IR2130PBF Features
Embedded in the Tube package
6 drivers
Employing a gate type of IGBT, N-Channel MOSFET
28 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 1.5W
Resistance of 75Ohm
IR2130PBF Applications
There are a lot of Infineon Technologies IR2130PBF gate drivers applications.
- AC-DC Inverters
- Video amplifiers
- Isolated switch mode power supplies (SMPS)
- Isolated Gate Driver Supplies
- High current laser/LED systems
- High-voltage isolated DC-DC converters
- General Purpose 3-Phase Inverter
- Industrial Power Supplies
- High frequency line drivers
- High power buffers
