IR2130SPBF
| Parameters | |
|---|---|
| Resistance | 75Ohm |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.5W |
| Technology | MOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | IR2130SPBF |
| Number of Outputs | 6 |
| Output Voltage | 20V |
| Max Output Current | 500mA |
| Operating Supply Voltage | 15V |
| Nominal Supply Current | 30μA |
| Power Dissipation | 1.6W |
| Output Current | 250mA |
| Propagation Delay | 850 ns |
| Input Type | Inverting |
| Turn On Delay Time | 850 ps |
| Max Output Voltage | 20V |
| Rise Time | 125ns |
| Fall Time (Typ) | 55 ns |
| Turn-Off Delay Time | 425 ns |
| Min Output Voltage | 10V |
| Rise / Fall Time (Typ) | 80ns 35ns |
| Channel Type | 3-Phase |
| Turn On Time | 0.85 μs |
| Output Peak Current Limit-Nom | 0.5A |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 250mA 500mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Turn Off Time | 0.55 μs |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 2.35mm |
| Length | 18.0848mm |
| Width | 7.5946mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
IR2130SPBF Overview
Its 28-SOIC (0.295, 7.50mm Width) package provides greater flexibility.Tube represents the package.Surface Mount is mounted in the way of the device.By using 10V~20V supply voltage, it is able to demonstrate its superiority.Gate type IGBT, N-Channel MOSFET has been used in its design.In this device, temperatures must not exceed -40°C~150°C TJ.This program uses the input type of Inverting.The configuration is based on 28 terminations.Numerous related parts are available for its base part number IR2130SPBF.The device is mounted using Surface Mount.The pins are configured with 28 when designing the chip.The device is specifically designed to operate at 15V volts.Mosfet driver is possible to achieve a maximum output current of 500mA.Its subcategory of MOSFET Drivers contains various useful electronic components.A high-side voltage can be set up to 600V (Bootstrap).For its basis, 6 outputs are integrated.Mosfet gate drivers can deliver a current of 250mA.According to its maximum power dissipation, 1.5W is capable of conducting and transferring a large amount of power without overheating.In this case, the voltage output is 20V.Mosfet gate drivers is recommended that the operating supply voltage be set to 15V volts.A resistance value of 75Ohm is required to operate this device.A maximum output voltage of 20V should be maintained.
IR2130SPBF Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel MOSFET
28 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 1.5W
Resistance of 75Ohm
IR2130SPBF Applications
There are a lot of Infineon Technologies IR2130SPBF gate drivers applications.
- High-speed communications
- Commercial air-conditioning (CAC)
- Active Clamp Flyback or Forward and Synchronous Rectifier
- serial peripheral interface (SPI), I2C
- LCD/LCoS/DLP portable and embedded pico projectors
- Automotive Applications
- Uninterruptible Power Supplies (UPS)
- RGB applications
- Commercial and agricultural vehicles (CAV)
- Digitally controlled power supplies
