IR2131PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.600, 15.24mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 75Ohm |
| HTS Code | 8542.39.00.01 |
| Max Power Dissipation | 1.5W |
| Technology | BICMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Number of Functions | 3 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | IR2131PBF |
| Max Output Current | 500mA |
| Nominal Supply Current | 4.5mA |
| Power Dissipation | 1.5W |
| Output Current | 160mA |
| Max Supply Current | 4.5mA |
| Propagation Delay | 2 μs |
| Input Type | Inverting |
| Turn On Delay Time | 1.3 μs |
| Rise Time | 150ns |
| Fall Time (Typ) | 100 ns |
| Turn-Off Delay Time | 600 ns |
| Rise / Fall Time (Typ) | 80ns 40ns |
| Channel Type | Independent |
| Number of Drivers | 6 |
| Output Peak Current Limit-Nom | 0.5A |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 250mA 500mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Turn Off Time | 1 μs |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 5.969mm |
| Length | 39.7256mm |
| Width | 14.73mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
IR2131PBF Overview
Gate drivers provides greater flexibilGate driversy to use the 28-DIP (0.600, 15.24mm) package.The packaging method is indicated by Tube.This device is equipped with 6 drivers for its configuration.Gate drivers is mounted in the way of Through Hole.When the supply voltage is 10V~20V it is able to demonstrate its superiority.Gate type IGBT, N-Channel MOSFET is designed for it.Mosfet driver is possible to use this device at temperatures as low as -40°C~150°C TJ.Inverting is used as its input type.Its configuration starts with 28 terminations.You will find various related parts under the base part number IR2131PBF.Devices are mounted by Through Hole.In the device, there are 28 pins.This device operates with 15V supply voltage.As a maximum, there is 500mA limit to the output current.The high-side voltage - Max (Bootstrap) can be up to 600V.Mosfet gate drivers can deliver a current of 160mA.Having the maximum power dissipation of 1.5W indicates its maximum capacity to conduct power losses without overheating.Mosfet gate drivers is recommended to keep the supply current at 4.5mA to ensure greater stabilMosfet gate driversy.As far as the resistance is concerned, it works with a resistance of 75Ohm.
IR2131PBF Features
Embedded in the Tube package
6 drivers
Employing a gate type of IGBT, N-Channel MOSFET
28 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 1.5W
Resistance of 75Ohm
IR2131PBF Applications
There are a lot of Infineon Technologies IR2131PBF gate drivers applications.
- UPS systems
- High-voltage isolated DC-DC converters
- High frequency line drivers
- Isolated switch mode power supplies (SMPS)
- Portable Media Players
- Power factor correction (PFC) circuits
- Multicolor LED/laser displays
- Automotive Applications
- Isolated Supplies for controller area network (CAN),
- Motor Drives
