IR2132
| Parameters | |
|---|---|
| Input Characteristics | STANDARD |
| Rise / Fall Time (Typ) | 80ns 35ns |
| Channel Type | 3-Phase |
| Number of Drivers | 6 |
| Turn On Time | 0.85 μs |
| Output Peak Current Limit-Nom | 0.5A |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 250mA 500mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Turn Off Time | 0.55 μs |
| High Side Voltage - Max (Bootstrap) | 600V |
| Length | 37.405mm |
| Width | 15.24mm |
| RoHS Status | Non-RoHS Compliant |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.600, 15.24mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| HTS Code | 8542.39.00.01 |
| Technology | BICMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | IR2132 |
| JESD-30 Code | R-PDIP-T28 |
| Qualification Status | Not Qualified |
| Input Type | Inverting |
| Output Characteristics | TOTEM-POLE |
| Output Polarity | INVERTED |
IR2132 Overview
A higher degree of flexibility is achieved by adopting its 28-DIP (0.600, 15.24mm) package.A packaging method of Tube is used.6 drivers are incorporated for its configuration.Ideally, it should be mounted in the direction of Through Hole.In the absence of a 10V~20V supply voltage, it can demonstrate its superiority.A gate type of IGBT, N-Channel MOSFET is used in its design.-40°C~150°C TJ is the allowed temperature range for this device.Inverting is the input type used in this program.It's configured with 28 terminations.There are various related parts under its base part number IR2132.Mosfet driver is designed specifically to run on 15V volts of power.Ideally, the high-side voltage should not exceed 600V.Its input is characterized by the value STANDARD.
IR2132 Features
Embedded in the Tube package
6 drivers
Employing a gate type of IGBT, N-Channel MOSFET
High-side voltage - Max (Bootstrap) of 600V
IR2132 Applications
There are a lot of Infineon Technologies IR2132 gate drivers applications.
- Isolated Supplies for controller area network (CAN),
- Industrial Modules
- High-voltage isolated DC-DC converters
- Motor Controls
- Video amplifiers
- Industrial motor drives - compact, standard, premium, servo drives
- RGB applications
- Uninterruptible Power Supplies (UPS)
- serial peripheral interface (SPI), I2C
- 3-Phase Motor Inverter Driver
