IR2132PBF
| Parameters | |
|---|---|
| Power Supplies | 15V |
| Nominal Supply Current | 30μA |
| Power Dissipation | 1.5W |
| Output Current | 200mA |
| Propagation Delay | 850 ns |
| Input Type | Inverting |
| Turn On Delay Time | 675 ns |
| Rise Time | 125ns |
| Fall Time (Typ) | 55 ns |
| Turn-Off Delay Time | 425 ns |
| Rise / Fall Time (Typ) | 80ns 35ns |
| Channel Type | 3-Phase |
| Turn On Time | 0.85 μs |
| Output Peak Current Limit-Nom | 0.5A |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 250mA 500mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Turn Off Time | 0.55 μs |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 5.969mm |
| Length | 39.7256mm |
| Width | 14.732mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.600, 15.24mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 75Ohm |
| HTS Code | 8542.39.00.01 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.5W |
| Technology | MOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | IR2132PBF |
| Number of Outputs | 6 |
| Output Voltage | 300mV |
| Max Output Current | 500mA |
IR2132PBF Overview
In order to increase flexibility, the package 28-DIP (0.600, 15.24mm) is used.Gate drivers is package in Tube case.Ideally, it should be mounted in the direction of Through Hole.When the supply voltage is set to 10V~20V, it can demonstrate its superiority.IGBT, N-Channel MOSFET is the gate type used for this design.There is a temperature range for this device of -40°C~150°C TJ.The input type is Inverting.Its configuration is based on a total of 28 terminations.There are various parts that can be found under its base part number IR2132PBF.You mount it with Through Hole.When the device is designed, it has 28 pins.Mosfet driver is designed specifically to run on 15V volts of power.500mA is the maximum output current.There are several useful electronic components in this subcategory of MOSFET Drivers.Mosfet driver is possible for the high-side voltage - Max (Bootstrap) to be as low as 600V.Mosfet driver is based on a basis of 6 outputs that have been integrated.The output current supported by the device is 200mA.This device has a maximum power dissipation of 1.5W, indicating that it is capable of reducing power loss without overheating.With its power supplies of 15V, it solves the power supply problems for diverse applications.A voltage of 300mV is output by this device.A resistance value of 75Ohm is required to operate this device.
IR2132PBF Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel MOSFET
28 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 1.5W
Resistance of 75Ohm
IR2132PBF Applications
There are a lot of Infineon Technologies IR2132PBF gate drivers applications.
- serial peripheral interface (SPI), I2C
- Solar inverters
- A/D drivers
- Video amplifiers
- Broadcast equipment
- Portable Media Players
- Automotive Applications
- Portable computers
- LCD/LCoS/DLP portable and embedded pico projectors
- DC/DC converters
