Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
44-LCC (J-Lead), 32 Leads |
Number of Pins |
44 |
Operating Temperature |
125°C TJ |
Packaging |
Tube |
Published |
1996 |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
32 |
Termination |
SMD/SMT |
ECCN Code |
EAR99 |
Resistance |
100Ohm |
Terminal Finish |
Matte Tin (Sn) |
HTS Code |
8542.39.00.01 |
Subcategory |
MOSFET Drivers |
Max Power Dissipation |
2W |
Technology |
CMOS |
Voltage - Supply |
10V~20V |
Terminal Position |
QUAD |
Terminal Form |
J BEND |
Number of Functions |
3 |
Supply Voltage |
15V |
Terminal Pitch |
1.27mm |
Base Part Number |
IR2133JPBF |
JESD-30 Code |
S-PQCC-J32 |
Number of Outputs |
6 |
Output Voltage |
300mV |
Max Output Current |
500mA |
Power Supplies |
15V |
Nominal Supply Current |
100μA |
Power Dissipation |
2W |
Output Current |
200mA |
Input Type |
Inverting |
Turn On Delay Time |
750 ns |
Max Output Voltage |
20V |
Rise Time |
150ns |
Fall Time (Typ) |
70 ns |
Turn-Off Delay Time |
950 ns |
Min Output Voltage |
10V |
Rise / Fall Time (Typ) |
90ns 40ns |
Channel Type |
3-Phase |
Turn On Time |
1 μs |
Output Peak Current Limit-Nom |
0.5A |
Driven Configuration |
Half-Bridge |
Gate Type |
IGBT, N-Channel MOSFET |
Current - Peak Output (Source, Sink) |
250mA 500mA |
High Side Driver |
YES |
Logic Voltage - VIL, VIH |
0.8V 2.2V |
Turn Off Time |
0.95 μs |
High Side Voltage - Max (Bootstrap) |
600V |
Height |
4.572mm |
Length |
16.66mm |
Width |
16.66mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
IR2133JPBF Overview
For greater flexibility, its 44-LCC (J-Lead), 32 Leads package is used.Gate drivers is packaged in the way of Tube.There is a mounting bracket in the way of Surface Mount.Using a 10V~20V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.A gate type of IGBT, N-Channel MOSFET has been used in its design.This device is allowed to operate in a temperature range of 125°C TJ.A type of Inverting is used for input in this program.Its configuration starts with 32 terminations.Numerous related parts can be found under its base part number IR2133JPBF.The device is mounted with Surface Mount.During design, it is configured with 44 pins.In order to operate, a voltage of 15V has to be applied.There is an output current limit of 500mA for this device.There are several useful electronic components found in its subcategory of MOSFET Drivers.The high-side voltage - Max (Bootstrap) can be up to 600V.Mosfet driver has been integrated wMosfet driverh a total of 6 outputs for Mosfet drivers basis.An output current of 200mA is supported.2W dissipates maximum power without overheating, showing its maximum capability to transfer and conduct power loss.The power supply 15V of the product solves the power supply problem for a variety of applications.When this voltage is produced, it is marked as 300mV.The system operates at a resistance of 100Ohm.Mosfet driver ic is recommended to keep the maximum output voltage at 20V.
IR2133JPBF Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel MOSFET
44 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 2W
Resistance of 100Ohm
IR2133JPBF Applications
There are a lot of Infineon Technologies IR2133JPBF gate drivers applications.
- A/D drivers
- Digitally controlled power supplies
- RGB applications
- Active Clamp Flyback or Forward and Synchronous Rectifier
- High current laser/LED systems
- Isolated switch mode power supplies (SMPS)
- AC-DC Inverters
- Solar power supplies
- Motor controllers
- Industrial Modules