IR2133PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.600, 15.24mm) |
| Number of Pins | 28 |
| Operating Temperature | 125°C TJ |
| Packaging | Tube |
| Published | 1996 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| HTS Code | 8542.39.00.01 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.5W |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 3 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | IR2133PBF |
| Qualification Status | Not Qualified |
| Max Output Current | 500mA |
| Power Supplies | 15V |
| Power Dissipation | 1.5W |
| Output Current | 200mA |
| Input Type | Inverting |
| Turn On Delay Time | 750 ns |
| Rise Time | 150ns |
| Fall Time (Typ) | 70 ns |
| Turn-Off Delay Time | 950 ns |
| Rise / Fall Time (Typ) | 90ns 40ns |
| Channel Type | 3-Phase |
| Number of Drivers | 6 |
| Turn On Time | 1 μs |
| Output Peak Current Limit-Nom | 0.5A |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 250mA 500mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Turn Off Time | 0.95 μs |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 5.969mm |
| Length | 39.7256mm |
| Width | 14.73mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
IR2133PBF Overview
In order to increase flexibility, the package 28-DIP (0.600, 15.24mm) is used.A packaging method of Tube is indicated.The configuration is supported by 6 drivers.In this case, gate drivers is mounted along the way of Through Hole.Using a 10V~20V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.There is a gate type of IGBT, N-Channel MOSFET in this design.Mosfet driver is possible to use this device at temperatures as low as 125°C TJ.The input type is Inverting.28 terminations constitute its foundation.Numerous related parts can be found under its base part number IR2133PBF.The mount method is Through Hole.When designing, the device is configured with 28 pins.In addition, it is specifically designed to operate with a supply voltage of 15V.The maximum output current can amount to 500mA.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.Max (Bootstrap) can be as high as 600V.An output current of 200mA is supported.This device has a maximum power dissipation of 1.5W, indicating that it is capable of reducing power loss without overheating.Based on its power supplies of 15V, it solves the problem of power supply failure for a variety of applications.A resistance value of 100Ohm is required to operate this device.
IR2133PBF Features
Embedded in the Tube package
6 drivers
Employing a gate type of IGBT, N-Channel MOSFET
28 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 1.5W
Resistance of 100Ohm
IR2133PBF Applications
There are a lot of Infineon Technologies IR2133PBF gate drivers applications.
- Head-up and Head mounted displays
- Broadcast equipment
- Welding
- Uninterruptible Power Supplies (UPS)
- Active filtering
- Multicolor LED/laser displays
- Motor Drives
- Power factor correction (PFC) circuits
- Dual-Battery Systems
- Telecom switch mode power supplies
