IR2135PBF
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.600, 15.24mm) |
| Number of Pins | 28 |
| Operating Temperature | 125°C TJ |
| Packaging | Tube |
| Published | 2005 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 100Ohm |
| Max Power Dissipation | 1.5W |
| Voltage - Supply | 10V~20V |
| Base Part Number | IR2135PBF |
| Output Voltage | 10V |
| Max Output Current | 500mA |
| Power Dissipation | 1.5W |
| Output Current | 200mA |
| Input Type | Inverting |
| Turn On Delay Time | 750 ns |
| Rise Time | 150ns |
| Fall Time (Typ) | 70 ns |
| Turn-Off Delay Time | 950 ns |
| Rise / Fall Time (Typ) | 90ns 40ns |
| Channel Type | 3-Phase |
| Number of Drivers | 6 |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 250mA 500mA |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 5.969mm |
| Length | 39.7256mm |
| Width | 14.732mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
IR2135PBF Overview
In order to increase flexibility, the package 28-DIP (0.600, 15.24mm) is used.There is a package in the form of Tube.The configuration is supported by 6 drivers.Its recommended mounting way is Through Hole.In the absence of a power supply voltage of 10V~20V V, it is able to demonstrate its superiority.This device is designed with a IGBT, N-Channel MOSFET gate type.This device is allowed to operate in a temperature range of 125°C TJ.Inverting is used as the input type in this program.Under its base part number IR2135PBF, various related parts can be found.The device is mounted using Through Hole.A total of 28 pins are available on the device.Mosfet driver is possible for the output current to be as low as 500mA.There can be a voltage up to 600V on the high-side (Bootstrap).Mosfet gate drivers can deliver a current of 200mA.Using 1.5W as an example, the maximum power dissipation shows how well it is able to transfer and conduct power loss without becoming overheated.In this case, the voltage output is 10V.The resistance of the device is 100Ohm.
IR2135PBF Features
Embedded in the Tube package
6 drivers
Employing a gate type of IGBT, N-Channel MOSFET
28 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 1.5W
Resistance of 100Ohm
IR2135PBF Applications
There are a lot of Infineon Technologies IR2135PBF gate drivers applications.
- Head-up and Head mounted displays
- Smart Phones
- Industrial Power Supplies
- Broadcast equipment
- Solar power supplies
- Commercial and agricultural vehicles (CAV)
- Isolated Supplies for controller area network (CAN),
- Motor controllers
- AC-DC Inverters
- LCD/LCoS/DLP portable and embedded pico projectors
