IR2135SPBF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | 125°C TJ |
| Packaging | Tube |
| Published | 2005 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Termination | SMD/SMT |
| Resistance | 100Ohm |
| Max Power Dissipation | 1.6W |
| Voltage - Supply | 10V~20V |
| Base Part Number | IR2135SPBF |
| Output Voltage | 300mV |
| Max Output Current | 500mA |
| Nominal Supply Current | 100μA |
| Power Dissipation | 1.6W |
| Output Current | 200mA |
| Input Type | Inverting |
| Turn On Delay Time | 750 ns |
| Max Output Voltage | 20V |
| Rise Time | 150ns |
| Fall Time (Typ) | 70 ns |
| Turn-Off Delay Time | 950 ns |
| Min Output Voltage | 10V |
| Rise / Fall Time (Typ) | 90ns 40ns |
| Channel Type | 3-Phase |
| Number of Drivers | 6 |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 250mA 500mA |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 2.3622mm |
| Length | 18.0848mm |
| Width | 7.5946mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
IR2135SPBF Overview
Gate drivers provides greater flexibilGate driversy to use the 28-SOIC (0.295, 7.50mm Width) package.A packaging method of Tube is used.Configuration is supported by 6 drivers.Surface Mount is mounted in the way of the device.A supply voltage of 10V~20V demonstrates its superiority.A gate type of IGBT, N-Channel MOSFET is used in its design.125°C TJ is the allowed temperature range for this device.Inverting is used as the input type.Numerous related parts are available for its base part number IR2135SPBF.In this case, Surface Mount indicates how the device is to be mounted.As a result, it is configured with 28 pins when it is designed.Mosfet driver is possible for the output current to be as low as 500mA.A boot strap voltage of 600V is the maximum possible high-side voltage.Mosfet gate drivers can deliver a current of 200mA.Its maximum power dissipation of 1.6W also demonstrates its maximum ability to transfer power without overheating.300mV is the output voltage.Resistance 100Ohm is used for operation.A maximum voltage of 20V should be maintained for the output voltage.
IR2135SPBF Features
Embedded in the Tube package
6 drivers
Employing a gate type of IGBT, N-Channel MOSFET
28 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 1.6W
Resistance of 100Ohm
IR2135SPBF Applications
There are a lot of Infineon Technologies IR2135SPBF gate drivers applications.
- Industrial motor drives - compact, standard, premium, servo drives
- Motor Controls
- Commercial and agricultural vehicles (CAV)
- Portable computers
- Welding
- RGB applications
- PCMCIA applications
- 3-Phase Motor Inverter Driver
- Solar power supplies
- LCD/LCoS/DLP portable and embedded pico projectors
