IR21363STRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Weight | 2.214806g |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 1996 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Additional Feature | FLOATING LOAD DRIVER; UNDER VOLTAGE LOCKOUT CIRCUIT |
| HTS Code | 8542.39.00.01 |
| Max Power Dissipation | 1.6W |
| Voltage - Supply | 12V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | IR21363SPBF |
| Max Output Current | 350mA |
| Power Dissipation | 1.6W |
| Output Current | 350mA |
| Propagation Delay | 690 ns |
| Input Type | Inverting |
| Turn On Delay Time | 680 ns |
| Rise Time | 190ns |
| Fall Time (Typ) | 75 ns |
| Turn-Off Delay Time | 690 ns |
| Rise / Fall Time (Typ) | 125ns 50ns |
| Channel Type | 3-Phase |
| Number of Drivers | 6 |
| Turn On Time | 0.55 μs |
| Output Peak Current Limit-Nom | 0.35A |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 200mA 350mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 3V |
| Turn Off Time | 0.55 μs |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 2.3622mm |
| Length | 18.0848mm |
| Width | 7.5946mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
IR21363STRPBF Overview
A higher degree of flexibility is achieved by adopting its 28-SOIC (0.295, 7.50mm Width) package.Tape & Reel (TR) represents the packaging method.Gate drivers is configured wGate driversh 6 drivers.Gate drivers is mounted in the way of Surface Mount.In the absence of a 12V~20V supply voltage, it can demonstrate its superiority.There is a gate type of IGBT, N-Channel MOSFET in this design.This device can operate at temperatures up to -40°C~150°C TJ.Inverting is used as the input type.Mosfet driver is based on 28 terminations.Under its base part number IR21363SPBF, various related parts can be found.In this case, Surface Mount indicates how the device is mounted.There are 28 pins available in the device.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 15V.Mosfet driver is possible for the output current to be as low as 350mA.Ideally, the high-side voltage should not exceed 600V.Mosfet driver supports an output current of 350mA.Its maximum power dissipation of 1.6W also demonstrates its maximum ability to transfer power without overheating.Mosfet gate drivers is also possible to provide FLOATING LOAD DRIVER; UNDER VOLTAGE LOCKOUT CIRCUIT based on a unique technology in this field.The system operates at a resistance of 100Ohm.
IR21363STRPBF Features
Embedded in the Tape & Reel (TR) package
6 drivers
Employing a gate type of IGBT, N-Channel MOSFET
28 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 1.6W
FLOATING LOAD DRIVER; UNDER VOLTAGE LOCKOUT CIRCUIT
Resistance of 100Ohm
IR21363STRPBF Applications
There are a lot of Infineon Technologies IR21363STRPBF gate drivers applications.
- High frequency line drivers
- LCD/LCoS/DLP portable and embedded pico projectors
- Portable Navigation Devices
- Active Clamp Flyback or Forward and Synchronous Rectifier
- General Purpose 3-Phase Inverter
- Active filtering
- Commercial and agricultural vehicles (CAV)
- Motor Drives
- Power factor correction (PFC) circuits
- Topologies
