IR2153PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount, Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 1996 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Integrated Circuit (IC) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Voltage - Supply | 10V~15.6V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Frequency | 106kHz |
| Base Part Number | IR2153PBF |
| Number of Outputs | 2 |
| Output Voltage | 10V |
| Max Output Current | 400mA |
| Nominal Supply Current | 5mA |
| Power Dissipation | 1W |
| Output Current | 400mA |
| Max Supply Current | 5mA |
| Input Type | RC Input Circuit |
| Turn On Delay Time | 150 ns |
| Input Offset Voltage (Vos) | 600V |
| Rise Time | 150ns |
| Fall Time (Typ) | 100 ns |
| Turn-Off Delay Time | 100 ns |
| Rise / Fall Time (Typ) | 80ns 45ns |
| Channel Type | Synchronous |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| High Side Driver | YES |
| Height | 4.9276mm |
| Length | 10.8966mm |
| Width | 7.11mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead, Lead Free |
IR2153PBF Overview
For greater flexibility, its 8-DIP (0.300, 7.62mm) package is used.Tube is the packaging method.Gate drivers is mounted in the way of Through Hole.When the supply voltage is 10V~15.6V it is able to demonstrate its superiority.A gate type of N-Channel MOSFET has been used in its design.This device is allowed to operate in a temperature range of -40°C~125°C TJ.RC Input Circuit is used as its input type.8 terminations constitute its foundation.Numerous related parts can be found under its base part number IR2153PBF.Mosfet driver is mounted using the Surface Mount, Through Hole method.When designing, the device is configured with 8 pins.This device operates with 12V supply voltage.Mosfet driver is possible for the output current to be as low as 400mA.This subcategory of MOSFET Drivers has a number of useful electronic components.Based on its basis, it integrates 2 outputs.Mosfet driver supports an output current of 400mA.Based on the maximum power dissipation of 1W, it is clear that it is capable of transferring and conducting power losses without becoming overheated.To increase stability, keep the supply current at 5mA.When this voltage is produced, it is marked as 10V.When 106kHz is used frequently, efficiency can be improved.
IR2153PBF Features
Embedded in the Tube package
Employing a gate type of N-Channel MOSFET
8 pins
Maximum power dissipation of 1W
IR2153PBF Applications
There are a lot of Infineon Technologies IR2153PBF gate drivers applications.
- Industrial Motor Inverter - Power Tools, Robotics
- Commercial and agricultural vehicles (CAV)
- Isolated switch mode power supplies (SMPS)
- Isolated Gate Driver Supplies
- PCMCIA applications
- High-voltage isolated DC-DC converters
- 3-Phase Motor Inverter Driver
- High power buffers
- High-speed communications
- DC/DC converters
