IR2155PBF
| Parameters | |
|---|---|
| Max Output Current | 500mA |
| Operating Supply Current | 5mA |
| Nominal Supply Current | 5mA |
| Power Dissipation | 1W |
| Output Current | 500mA |
| Max Supply Current | 5mA |
| Input Type | RC Input Circuit |
| Rise Time | 120ns |
| Fall Time (Typ) | 70 ns |
| Rise / Fall Time (Typ) | 80ns 45ns |
| Channel Type | Synchronous |
| Output Peak Current Limit-Nom | 0.5A |
| Supply Voltage1-Nom | 12V |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 250mA 500mA |
| High Side Driver | YES |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 4.9276mm |
| Length | 10.8966mm |
| Width | 7.11mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead, Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Integrated Circuit (IC) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Frequency | 106kHz |
| Base Part Number | IR2155PBF |
| Number of Outputs | 2 |
| Output Voltage | 10V |
IR2155PBF Overview
Gate drivers provides greater flexibilGate driversy to use the 8-DIP (0.300, 7.62mm) package.A packaging method of Tube is used.Its recommended mounting way is Through Hole.When the supply voltage is 10V~20V it is able to demonstrate its superiority.This gate type has a IGBT, N-Channel MOSFET design.There is a temperature range for this device of -40°C~150°C TJ.RC Input Circuit is used as its input type.Mosfet driver is based on 8 terminations.Numerous related parts are available for its base part number IR2155PBF.The device is mounted using Through Hole.Mosfet driver is configured wMosfet driverh 8 pins when designing.In addition, it is specifically designed to operate with a supply voltage of 12V.Mosfet driver is possible for the output current to be as low as 500mA.Its subcategory of MOSFET Drivers contains various useful electronic components.Mosfet driver is possible to set the high-side voltage - Max (Bootstrap) to 600V.For its basis, there are 2 outputs integrated.Mosfet gate drivers supports a current output of 500mA.This device has a maximum power dissipation of 1W, indicating that it is capable of reducing power loss without overheating.To maintain higher stability, the supply current should always be 5mA.In this case, it produces a voltage of 10V.The power supply voltage for this device is set to 5mA.By increasing the frequency of 106kHz, efficiency can be improved.
IR2155PBF Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 1W
IR2155PBF Applications
There are a lot of Infineon Technologies IR2155PBF gate drivers applications.
- Dual-Battery Systems
- DC/DC converters
- Solar inverters
- serial peripheral interface (SPI), I2C
- High current laser/LED systems
- Portable Navigation Devices
- Topologies
- Active Clamp Flyback or Forward and Synchronous Rectifier
- RGB applications
- Smart Phones
