IR21571PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Type | Ballast Controller |
| Terminal Finish | MATTE TIN |
| Max Power Dissipation | 1.6W |
| Voltage - Supply | 10.5V~16.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Frequency | 45.5kHz~50.5kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | IR21571PBF |
| Number of Outputs | 2 |
| Output Voltage | 25V |
| Max Output Current | 250mA |
| Operating Supply Voltage | 12.4V |
| Input Voltage-Nom | 14V |
| Operating Supply Current | 5.5mA |
| Nominal Supply Current | 20mA |
| Output Current | 500mA |
| Max Supply Current | 10mA |
| Max Output Voltage | 25V |
| Rise Time | 85ns |
| Fall Time (Typ) | 45 ns |
| Min Output Voltage | 10V |
| Switcher Configuration | PUSH-PULL |
| Dimming | No |
| Height | 5.33mm |
| Length | 21.33mm |
| Width | 7.11mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IR21571PBF Overview
As per Tube's specifications, the package is designed accordingly.It's no secret that electronic manufacturers are attracted to the 16-DIP (0.300, 7.62mm)'s low package cost.Using Through Hole, it is mounted on the PCB.Type Ballast Controller refers to applications of standard grade.A power supply voltage ensures the device's proper operation.It should always be operated at -40°C~125°C.Even at 45.5kHz~50.5kHz frequency, it remains accurate.Best part of the device is the number IR21571PBF.The terminations are of type 16.In 1 functions, the device runs.It is set to 5.5mA for the supply current.It remains at 16 for the component's pin number.During mounting, the Through Hole-axis is used.The output current is set to 500mA in this case.For it to work, 12.4V voltage is required.With 25V's output, this device can be operated.Temperatures up to 10mA are supported by the supply.A lot of outputs are 2.At most, it can output 250mA output current.
IR21571PBF Features
Mounting type of Through Hole
Operating supply voltage of 12.4V
2 outputs
IR21571PBF Applications
There are a lot of Infineon Technologies IR21571PBF Lighting Controllers applications.
- Power factor correction (PFC)
- DC buffering
- Lighting ballast
- Flashtube ignition
- Server motherboards
- DC/DC, DC/AC, and AC/AC converters
- Decoupling or bypassing
- Voltage doubling
- Frequency converters
- Audio crossover
