IR21593SPBF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-SOIC |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2006 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Termination | SMD/SMT |
| Type | Ballast Controller |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Voltage - Rated | 625V |
| Max Power Dissipation | 1.25W |
| Voltage - Supply | 12V~16.5V |
| Frequency | 30kHz~230kHz |
| Base Part Number | IR21593SPBF |
| Number of Outputs | 2 |
| Output Voltage | 25V |
| Max Output Current | 500mA |
| Max Supply Voltage | 25V |
| Min Supply Voltage | 12V |
| Operating Supply Current | 10mA |
| Nominal Supply Current | 10mA |
| Output Current | 500mA |
| Current - Supply | 10mA |
| Max Output Voltage | 25V |
| Min Output Voltage | 12V |
| Power Consumption | 1.25W |
| Sensing Method | Infrared (IR) |
| Dimming | Yes |
| Height | 1.75mm |
| Length | 9.98mm |
| Width | 3.99mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
IR21593SPBF Overview
Packaged in accordance with Tube's materials.Its low package cost attracts electronics manufacturers.Using Surface Mount, the board is mounted.Type Ballast Controller applications qualify it as standard grade.An appropriate power supply voltage ensures that it operates normally.The system should always be operated at -40°C~125°C.Despite operating at 30kHz~230kHz frequency, it is still accurate.Best part of the device is the number IR21593SPBF.The system functions by using the supply current of 10mA.There is a 10mA setting on the device's supply current.The pin number for the component stays at 16.A Surface Mount-direction mount is used.This case provides an output current of 500mA.The device is packaged in a package provided by 16-SOIC Supplier.The output of 25V can be used to control this device.The temperature should be higher than -40°C when the system is in operation.Currently, 125°C is the maximum operating temperature.This product can only be used with a voltage of 25V.A lot of outputs are 2.There is a maximum output current of 500mA.It requires a voltage of 12V volts to operate.
IR21593SPBF Features
Mounting type of Surface Mount
Maximum temperature of -40°C
2 outputs
IR21593SPBF Applications
There are a lot of Infineon Technologies IR21593SPBF Lighting Controllers applications.
- Voltage doubling
- To enhance power efficiency
- Motor control
- Flashtube ignition
- Coupling or blocking
- Server motherboards
- Signal decoupling & power bypass
- Noise filtering
- Spot welding
- Frequency converters
