banner_page

IR2175SPBF

8 Terminations15V 8 Pin IR2175SPBF Current regulator1 Outputs-40°C~125°C Min 9.5V Max 20V


  • Manufacturer: Infineon Technologies
  • Nocochips NO: 376-IR2175SPBF
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 107
  • Description: 8 Terminations15V 8 Pin IR2175SPBF Current regulator1 Outputs-40°C~125°C Min 9.5V Max 20V (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature -40°C~125°C
Packaging Tube
Published 2003
JESD-609 Code e3
Part Status Active
Moisture Sensitivity Level (MSL) 2 (1 Year)
Number of Terminations 8
Termination SMD/SMT
ECCN Code EAR99
Terminal Finish Matte Tin (Sn)
Subcategory Power Management Circuits
Terminal Position DUAL
Terminal Form GULL WING
Supply Voltage 15V
Base Part Number IR2175SPBF
Function Current Sense
Number of Outputs 1
Output Voltage 0V
Number of Channels 1
Max Supply Voltage 20V
Min Supply Voltage 9.5V
Analog IC - Other Type POWER SUPPLY SUPPORT CIRCUIT
Voltage - Input 9.5V~20V
Nominal Supply Current 500μA
Current - Output 20mA
Adjustable Threshold NO
Quiescent Current 2mA
Accuracy ±0.5%
Max Output Voltage 20V
Min Input Voltage -260mV
Max Input Voltage 260mV
Input Offset Voltage (Vos) 600V
Bandwidth 15 kHz
Supply Current-Max (Isup) 0.5mA
Height 1.4986mm
Length 4.9784mm
Width 3.9878mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Contains Lead, Lead Free

IR2175SPBF Overview


Buck boost converter is embedded in the Tube package.8-SOIC (0.154, 3.90mm Width) is the way in which voltage regulator is packaged.There is a Surface Mount mounted on this current regulator.There should be no temperature above -40°C~125°C at the time of operation.Current regulator supports the input voltage of 9.5V~20V.8 terminations are treated as terminations of transmission lines that use a voltage regulator with the characteristic impedance of the line as the means to terminate the transmission line.Among the IR2175SPBF family of products.8-pins are pronged contacts that form part of a computer's or other constant current regulator's signal interface.There is a Surface Mount mounting bracket on the back of this current regulator.The constant current should work as long as it is powered by a 15VV power source, and therefore must be plugged into a 15VV outlet.As a result of 20mA's output current, it is one of the most flexible power converters available.This power converter employs an analog IC called POWER SUPPLY SUPPORT CIRCUIT.A significant number of channels are growing strongly/weakly: 1.It supports the maximal supply voltage of 20V.Power Management Circuits, which is a part that contains all of these current regulations, is included in this part.As long as the supply voltage is lower than 9.5V, it will operate correctly.A maximum current supply (Isup) is supplied for its operation when the boost converter reaches its limit (0.5mA).260mV features maximum design power converter flexibility thanks to its maximum input voltage.As a result of its minimal input voltage, -260mV is able to offer maximum design flexibility.With 1 output, it is configured.There is no matter what external influences are present, it consumes 2mA of quiescent current.

IR2175SPBF Features


Tube package
IR2175SPBF family
The maximal supply voltage of 20V
1 output

IR2175SPBF Applications


There are a lot of Infineon Technologies IR2175SPBF Current Regulation/Managements applications.

  • Level translating
  • Over-current measurement
  • Current sensing
  • Over-current protection
  • Battery chargers
  • Automotive current measurement
  • Power supply current measurement
  • Power management
  • Programmable current source
  • Suspension controls

Write a review

Note: HTML is not translated!
    Bad           Good