IR21834STRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 1996 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | IR21834SPBF |
| Output Voltage | 20V |
| Max Output Current | 2.3A |
| Nominal Supply Current | 1mA |
| Power Dissipation | 1W |
| Output Current | 1.9A |
| Max Supply Current | 1.6mA |
| Propagation Delay | 330 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 35 ns |
| Rise Time | 40ns |
| Fall Time (Typ) | 20 ns |
| Turn-Off Delay Time | 220 ns |
| Rise / Fall Time (Typ) | 40ns 20ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 2.3A |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.9A 2.3A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.7V |
| Turn Off Time | 0.33 μs |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 1.4986mm |
| Length | 8.7376mm |
| Width | 3.9878mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IR21834STRPBF Overview
Its 14-SOIC (0.154, 3.90mm Width) package provides greater flexibility.Gate drivers is package in Tape & Reel (TR) case.Configuration is based on 2 drivers.Ideally, it should be mounted in the direction of Surface Mount.WGate driversh a 10V~20V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.There is a gate type of IGBT, N-Channel MOSFET in this design.In this device, temperatures must not exceed -40°C~150°C TJ.Inverting, Non-Inverting is used as the input type.Mosfet driver consists of 14 terminations as Mosfet drivers foundation.There are various parts that can be found under its base part number IR21834SPBF.In this case, Surface Mount indicates how the device is to be mounted.When designing, the device is configured with 14 pins.In addition, it is specifically designed to operate with a supply voltage of 15V.The maximum output current can amount to 2.3A.Mosfet driver is possible for the high-side voltage - Max (Bootstrap) to be as low as 600V.The output current supported by the device is 1.9A.1W dissipates maximum power without overheating, showing its maximum capability to transfer and conduct power loss.Mosfet gate drivers is recommended that you keep the supply current at 1.6mA in order to achieve greater stabilMosfet gate driversy.The voltage it outputs is 20V.
IR21834STRPBF Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
14 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 1W
IR21834STRPBF Applications
There are a lot of Infineon Technologies IR21834STRPBF gate drivers applications.
- High frequency line drivers
- General Purpose 3-Phase Inverter
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Motor controllers
- Isolated Supplies for Motor Control
- Uninterruptible Power Supplies (UPS)
- High-speed communications
- DC/DC converters
- Broadcast equipment
- LCD/LCoS/DLP portable and embedded pico projectors
