IR2183PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | IR2183PBF |
| Number of Outputs | 2 |
| Max Output Current | 2.3A |
| Nominal Supply Current | 1.6mA |
| Power Dissipation | 1W |
| Output Current | 1.9A |
| Max Supply Current | 1.6mA |
| Propagation Delay | 330 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 35 ns |
| Rise Time | 60ns |
| Fall Time (Typ) | 35 ns |
| Turn-Off Delay Time | 220 ns |
| Release Time | 220 ns |
| Rise / Fall Time (Typ) | 40ns 20ns |
| Channel Type | Independent |
| Output Peak Current Limit-Nom | 2.3A |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.9A 2.3A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.7V |
| Turn Off Time | 0.33 μs |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 4.9276mm |
| Length | 10.8966mm |
| Width | 7.11mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead, Lead Free |
IR2183PBF Overview
There is greater flexibility with the 8-DIP (0.300, 7.62mm) package.A package of Tube has been used.Ideally, it should be mounted in the direction of Through Hole.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 10V~20V.This device is designed with a IGBT, N-Channel MOSFET gate type.In this device, temperatures must not exceed -40°C~150°C TJ.Mosfet driver accepts input of type Inverting, Non-Inverting.As a result of its configuration, it contains a maximum of 8 terminations.Numerous related parts are available for its base part number IR2183PBF.Mosfet driver is mounted using the Through Hole method.As a result, it is configured with 8 pins when it is designed.In order to operate, a voltage of 15V has to be applied.In the maximum case, the output current can be 2.3A volts.There are several useful electronic components in this subcategory of MOSFET Drivers.Ideally, the high-side voltage should not exceed 600V.Based on its basis, it integrates 2 outputs.The output current supported by the device is 1.9A.Based on its maximum power dissipation of 1W, it is clear that it is capable of transferring and conducting power loss without overheating.To maintain higher stability, the supply current should always be 1.6mA.
IR2183PBF Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 1W
IR2183PBF Applications
There are a lot of Infineon Technologies IR2183PBF gate drivers applications.
- Motor Drives
- Topologies
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- AC-DC Inverters
- High power buffers
- serial peripheral interface (SPI), I2C
- Automotive Applications
- Refrigerator
- Commercial and agricultural vehicles (CAV)
- Industrial motor drives - compact, standard, premium, servo drives
