IR22141SSPBF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 24 |
| Supplier Device Package | 24-SSOP |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Resistance | 60Ohm |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 1.5W |
| Voltage - Supply | 11.5V~20V |
| Base Part Number | IR22141SSPBF |
| Number of Outputs | 2 |
| Output Voltage | 620V |
| Max Output Current | 3A |
| Max Supply Voltage | 20V |
| Min Supply Voltage | 11.5V |
| Nominal Supply Current | 2.5mA |
| Power Dissipation | 1.5W |
| Output Current | 1A |
| Max Supply Current | 2.5mA |
| Propagation Delay | 660 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 440 ns |
| Rise Time | 24ns |
| Fall Time (Typ) | 7 ns |
| Turn-Off Delay Time | 440 ns |
| Release Time | 440 ns |
| Rise / Fall Time (Typ) | 24ns 7ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Input Bias Current | 330μA |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT |
| Current - Peak Output (Source, Sink) | 2A 3A |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| High Side Voltage - Max (Bootstrap) | 1200V |
| Height | 1.75mm |
| Length | 8.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
IR22141SSPBF Overview
The 24-SSOP (0.209, 5.30mm Width) package offers greater flexibility.A package of Tube has been used.The configuration is supported by 2 drivers.Surface Mount is the way in which it is mounted.In the absence of a 11.5V~20V supply voltage, it can demonstrate its superiority.This device is designed with a IGBT gate type.Mosfet driver is possible to use this device at temperatures as low as -40°C~150°C TJ.Mosfet driver accepts input of type Non-Inverting.There are numerous related parts listed under its base part number IR22141SSPBF.Mounting the device requires Surface Mount.In the device, there are 24 pins.Mosfet driver is possible for the output current to be as low as 3A.Max (Bootstrap) can be as high as 1200V.The basis of the model has 2 outputs integrated.This device supports a current output of 1A at the output.A maximum operating temperature of 125°C is permissible.Operating temperatures must not exceed -40°C.Based on the maximum power dissipation of 1.5W, it is clear that it is capable of transferring and conducting power losses without becoming overheated.Mosfet gate drivers is recommended that you keep the supply current at 2.5mA in order to achieve greater stabilMosfet gate driversy.For operation, it requires a voltage of 20V.This device is designed to operate with a voltage of 11.5V.A voltage of 620V is output by this device.For this device to function, a resistance value of 60Ohm is required.
IR22141SSPBF Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT
24 pins
High-side voltage - Max (Bootstrap) of 1200V
Maximum power dissipation of 1.5W
Resistance of 60Ohm
IR22141SSPBF Applications
There are a lot of Infineon Technologies IR22141SSPBF gate drivers applications.
- 3-Phase Motor Inverter Driver
- Portable Media Players
- Power factor correction (PFC) circuits
- Uninterruptible Power Supplies (UPS)
- Line drivers
- PCMCIA applications
- Digitally controlled power supplies
- serial peripheral interface (SPI), I2C
- Industrial Modules
- AC-DC Inverters
