IR22141SSTRPBF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 24 |
| Supplier Device Package | 24-SSOP |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Resistance | 60Ohm |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 1.5W |
| Voltage - Supply | 11.5V~20V |
| Base Part Number | IR22141SSPBF |
| Number of Outputs | 2 |
| Max Output Current | 3A |
| Max Supply Voltage | 20V |
| Min Supply Voltage | 11.5V |
| Nominal Supply Current | 2.5mA |
| Power Dissipation | 1.5W |
| Output Current | 1A |
| Max Supply Current | 2.5mA |
| Propagation Delay | 660 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 440 ns |
| Rise Time | 24ns |
| Fall Time (Typ) | 7 ns |
| Turn-Off Delay Time | 440 ns |
| Rise / Fall Time (Typ) | 24ns 7ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Input Bias Current | 330μA |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT |
| Current - Peak Output (Source, Sink) | 2A 3A |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| High Side Voltage - Max (Bootstrap) | 1200V |
| Height | 1.8542mm |
| Length | 8.4836mm |
| Width | 5.588mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
IR22141SSTRPBF Overview
In order to increase flexibility, the package 24-SSOP (0.209, 5.30mm Width) is used.There is a package in the form of Tape & Reel (TR).For its configuration, it incorporates 2 drivers.Ideally, it should be mounted in the direction of Surface Mount.WGate driversh a 11.5V~20V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.IGBT is the gate type used for this design.In this device, temperatures must not exceed -40°C~150°C TJ.Non-Inverting is used as its input type.Numerous related parts are available for its base part number IR22141SSPBF.The device is mounted using Surface Mount.When the device is designed, it has 24 pins.There is an output current limit of 3A for this device.Mosfet driver is possible for the high-side voltage - Max (Bootstrap) to be as low as 1200V.The basis has 2 integrated outputs.This device is capable of delivering 1A current.Mosfet gate drivers is permissible to operate at a temperature of 125°C.Temperatures below -40°C are allowed as the minimum.Having the maximum power dissipation of 1.5W indicates its maximum capacity to conduct power losses without overheating.In order to ensure greater stability, it is recommended to keep the supply current at 2.5mA.During operation, the supply voltage of 20V is its maximum value.In order for the device to function, the supply voltage must be set to 11.5V.Resistance 60Ohm is used for operation.
IR22141SSTRPBF Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of IGBT
24 pins
High-side voltage - Max (Bootstrap) of 1200V
Maximum power dissipation of 1.5W
Resistance of 60Ohm
IR22141SSTRPBF Applications
There are a lot of Infineon Technologies IR22141SSTRPBF gate drivers applications.
- Portable Media Players
- DC/DC converters
- Multicolor LED/laser displays
- serial peripheral interface (SPI), I2C
- Portable Navigation Devices
- AC-DC Inverters
- Industrial Modules
- Video amplifiers
- LCD/LCoS/DLP portable and embedded pico projectors
- Active Clamp Flyback or Forward and Synchronous Rectifier
