IR2214SSPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 60Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.5W |
| Technology | CMOS |
| Voltage - Supply | 11.5V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Base Part Number | IR2214SSPBF |
| Number of Outputs | 2 |
| Output Voltage | 1.22kV |
| Max Output Current | 3A |
| Power Supplies | 15V |
| Nominal Supply Current | 2.5mA |
| Power Dissipation | 1.5W |
| Output Current | 1A |
| Max Supply Current | 2.5mA |
| Propagation Delay | 660 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 440 ns |
| Rise Time | 24ns |
| Fall Time (Typ) | 7 ns |
| Turn-Off Delay Time | 440 ns |
| Rise / Fall Time (Typ) | 24ns 7ns |
| Channel Type | Independent |
| Turn On Time | 0.66 μs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT |
| Current - Peak Output (Source, Sink) | 2A 3A |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.66 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 1200V |
| Height | 1.75mm |
| Length | 8.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IR2214SSPBF Overview
For greater flexibility, the 24-SSOP (0.209, 5.30mm Width) package is adopted.A packaging method of Tube is used.It's mounted on the way to Surface Mount.Using a 11.5V~20V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.Gate type IGBT has been used in its design.This device is allowed to operate in a temperature range of -40°C~150°C TJ.Non-Inverting is used as the input type in this program.The configuration starts with 24 terminations.The base part number IR2214SSPBF refers to a number of related parts.The device is mounted with Surface Mount.A total of 24 pins are available on the device.A supply voltage of 15V is required for operation.As a maximum, there is 3A limit to the output current.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.High-side voltage - Max (Bootstrap) can be as low as 1200V.For its basis, there are 2 outputs integrated.The output current supported by the device is 1A.1.5W dissipates maximum power without overheating, showing its maximum capability to transfer and conduct power loss.If you want a stable supply current, you should keep it at 2.5mA.With its 15V power supply, it provides power for diverse applications.A voltage of 1.22kV is output by this device.The system operates at a resistance of 60Ohm.
IR2214SSPBF Features
Embedded in the Tube package
Employing a gate type of IGBT
24 pins
High-side voltage - Max (Bootstrap) of 1200V
Maximum power dissipation of 1.5W
Resistance of 60Ohm
IR2214SSPBF Applications
There are a lot of Infineon Technologies IR2214SSPBF gate drivers applications.
- Portable Media Players
- Smart Phones
- Portable computers
- AC-DC Inverters
- Motor controllers
- Pulse transformer drivers
- Solar inverters
- Uninterruptible Power Supplies (UPS)
- High frequency line drivers
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
