IR2214SSTRPBF
| Parameters | |
|---|---|
| Qualification Status | Not Qualified |
| Max Output Current | 3A |
| Power Supplies | 15V |
| Nominal Supply Current | 2.5mA |
| Power Dissipation | 1.5W |
| Output Current | 1A |
| Max Supply Current | 2.5mA |
| Propagation Delay | 660 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 440 ns |
| Rise Time | 24ns |
| Fall Time (Typ) | 7 ns |
| Turn-Off Delay Time | 440 ns |
| Rise / Fall Time (Typ) | 24ns 7ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.66 μs |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT |
| Current - Peak Output (Source, Sink) | 2A 3A |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.66 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 1200V |
| Height | 1.8542mm |
| Length | 8.4836mm |
| Width | 5.588mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 1996 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 60Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.5W |
| Voltage - Supply | 11.5V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | IR2214SSPBF |
IR2214SSTRPBF Overview
A higher degree of flexibility is achieved by adopting its 24-SSOP (0.209, 5.30mm Width) package.A packaging method of Tape & Reel (TR) is indicated.Configuration is based on 2 drivers.Its recommended mounting way is Surface Mount.When the supply voltage is set to 11.5V~20V, it can demonstrate its superiority.This device is designed with a IGBT gate type.The allowable temperature range that this device can be operated in is -40°C~150°C TJ.Mosfet driver uses Non-Inverting as Mosfet drivers input type.Its configuration starts with 24 terminations.There are various parts that can be found under its base part number IR2214SSPBF.In this case, Surface Mount indicates how the device is mounted.A total of 24 pins are available on the device.With a supply voltage of 15V, it is designed to operate.An output current as high as 3A can be achieved at maximum power.Mosfet driver includes a number of useful electronic components in Mosfet drivers subcategory of MOSFET Drivers.There can be a voltage up to 1200V on the high-side (Bootstrap).The device is capable of delivering a current of 1A.Its maximum power dissipation of 1.5W also demonstrates its maximum ability to transfer power without overheating.To ensure high stability, the supply current should be kept at 2.5mA.Due to its power supply of 15V, it provides an effective solution to power supply problems for a wide range of applications.With a resistance of 60Ohm, it operates.
IR2214SSTRPBF Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of IGBT
24 pins
High-side voltage - Max (Bootstrap) of 1200V
Maximum power dissipation of 1.5W
Resistance of 60Ohm
IR2214SSTRPBF Applications
There are a lot of Infineon Technologies IR2214SSTRPBF gate drivers applications.
- Refrigerator
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Power factor correction (PFC) circuits
- Isolated Supplies for controller area network (CAN),
- Video amplifiers
- DC/DC converters
- Commercial air-conditioning (CAC)
- Industrial Motor Inverter - Power Tools, Robotics
- High current laser/LED systems
- Welding
