IR2233JPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead), 32 Leads |
| Number of Pins | 44 |
| Operating Temperature | 125°C TJ |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 2W |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Number of Functions | 3 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Base Part Number | IR2233JPBF |
| JESD-30 Code | S-PQCC-J32 |
| Number of Outputs | 6 |
| Output Voltage | 20V |
| Max Output Current | 500mA |
| Power Supplies | 15V |
| Nominal Supply Current | 100μA |
| Power Dissipation | 2W |
| Output Current | 250mA |
| Input Type | Inverting |
| Turn On Delay Time | 750 ns |
| Max Output Voltage | 20V |
| Rise Time | 150ns |
| Fall Time (Typ) | 70 ns |
| Turn-Off Delay Time | 950 ns |
| Min Output Voltage | 10V |
| Release Time | 700 ns |
| Rise / Fall Time (Typ) | 90ns 40ns |
| Channel Type | 3-Phase |
| Turn On Time | 1 μs |
| Output Peak Current Limit-Nom | 0.5A |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 250mA 500mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.95 μs |
| High Side Voltage - Max (Bootstrap) | 1200V |
| Height | 4.57mm |
| Length | 16.66mm |
| Width | 16.66mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IR2233JPBF Overview
The 44-LCC (J-Lead), 32 Leads package offers greater flexibility.The packaging method is indicated by Tube.Surface Mount is mounted in the way.In the absence of a 10V~20V supply voltage, it can demonstrate its superiority.The gate type on this device is IGBT, N-Channel MOSFET.Mosfet driver is possible to use this device at temperatures as low as 125°C TJ.Input type of Inverting is used.Its configuration starts with 32 terminations.Numerous related parts can be found under its base part number IR2233JPBF.You mount it with Surface Mount.In the device, there are 44 pins.Mosfet driver is designed specifically to run on 15V volts of power.Mosfet driver is possible for the output current to be as low as 500mA.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.The high-side voltage - Max (Bootstrap) can be up to 1200V.Based on its basis, it integrates 6 outputs.The output current can be set to 250mA.Its maximum power dissipation of 2W also demonstrates its maximum ability to transfer power without overheating.With its power supplies of 15V, it solves the problems of power supply for a variety of applications.When this voltage is produced, it is marked as 20V.A resistance value of 100Ohm is required to operate this device.In this case, 20V should be set as the maximum output voltage.
IR2233JPBF Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel MOSFET
44 pins
High-side voltage - Max (Bootstrap) of 1200V
Maximum power dissipation of 2W
Resistance of 100Ohm
IR2233JPBF Applications
There are a lot of Infineon Technologies IR2233JPBF gate drivers applications.
- Power factor correction (PFC) circuits
- Digitally controlled power supplies
- High current laser/LED systems
- High power buffers
- Portable Media Players
- General Purpose 3-Phase Inverter
- Commercial air-conditioning (CAC)
- Commercial and agricultural vehicles (CAV)
- Motor Drives
- Industrial Modules
