IR2233JTRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead), 32 Leads |
| Number of Pins | 44 |
| Operating Temperature | 125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 1996 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| HTS Code | 8542.39.00.01 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 2W |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 3 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | IR2233JPBF |
| JESD-30 Code | S-PQCC-J32 |
| Qualification Status | Not Qualified |
| Max Output Current | 500mA |
| Power Supplies | 15V |
| Power Dissipation | 2W |
| Output Current | 200mA |
| Input Type | Inverting |
| Turn On Delay Time | 750 ns |
| Rise Time | 150ns |
| Fall Time (Typ) | 70 ns |
| Turn-Off Delay Time | 950 ns |
| Rise / Fall Time (Typ) | 90ns 40ns |
| Channel Type | 3-Phase |
| Number of Drivers | 6 |
| Supply Voltage1-Nom | 15V |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 250mA 500mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| High Side Voltage - Max (Bootstrap) | 1200V |
| Height | 4.57mm |
| Length | 16.66mm |
| Width | 16.66mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IR2233JTRPBF Overview
There is greater flexibility with the 44-LCC (J-Lead), 32 Leads package.Tape & Reel (TR) is the packaging method.Gate drivers incorporates wGate driversh 6 drivers for Gate driverss configuration.Its recommended mounting way is Surface Mount.When the supply voltage is 10V~20V it is able to demonstrate its superiority.The gate type on this device is IGBT, N-Channel MOSFET.In this device, temperatures must not exceed 125°C TJ.Mosfet driver uses Inverting as Mosfet drivers input type.Mosfet driver consists of 32 terminations as Mosfet drivers foundation.Mosfet driver is possible to find various related parts under Mosfet drivers base part number IR2233JPBF.Devices are mounted by Surface Mount.Mosfet driver is configured wMosfet driverh 44 pins when designing.In order to operate, a voltage of 15V has to be applied.As a maximum, there is 500mA limit to the output current.There are several useful electronic components in this subcategory of MOSFET Drivers.There can be a voltage up to 1200V on the high-side (Bootstrap).The output current supported by the device is 200mA.Based on its maximum power dissipation of 2W, it is clear that it is capable of transferring and conducting power loss without overheating.Using its power supply of 15V, it provides solutions to diverse power supply problems.With a resistance of 100Ohm, it operates.
IR2233JTRPBF Features
Embedded in the Tape & Reel (TR) package
6 drivers
Employing a gate type of IGBT, N-Channel MOSFET
44 pins
High-side voltage - Max (Bootstrap) of 1200V
Maximum power dissipation of 2W
Resistance of 100Ohm
IR2233JTRPBF Applications
There are a lot of Infineon Technologies IR2233JTRPBF gate drivers applications.
- PCMCIA applications
- High frequency line drivers
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- serial peripheral interface (SPI), I2C
- Motor Control
- A/D drivers
- DC-DC Converters
- Isolated Gate Driver Supplies
- Motor Drives
- Dual-Battery Systems
