IR2235JTRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead), 32 Leads |
| Number of Pins | 44 |
| Operating Temperature | 125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 1996 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Additional Feature | FLOATING LOAD DRIVER; UNDER VOLTAGE LOCKOUT CIRCUIT |
| HTS Code | 8542.39.00.01 |
| Max Power Dissipation | 2W |
| Technology | BICMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Number of Functions | 3 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Base Part Number | IR2235JPBF |
| JESD-30 Code | S-PQCC-J32 |
| Max Output Current | 500mA |
| Power Dissipation | 2W |
| Output Current | 200mA |
| Input Type | Inverting |
| Turn On Delay Time | 750 ns |
| Rise Time | 150ns |
| Fall Time (Typ) | 70 ns |
| Turn-Off Delay Time | 950 ns |
| Rise / Fall Time (Typ) | 90ns 40ns |
| Channel Type | 3-Phase |
| Number of Drivers | 6 |
| Turn On Time | 1 μs |
| Output Peak Current Limit-Nom | 0.5A |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 250mA 500mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.95 μs |
| High Side Voltage - Max (Bootstrap) | 1200V |
| Height | 4.572mm |
| Length | 16.6624mm |
| Width | 16.6624mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IR2235JTRPBF Overview
Its 44-LCC (J-Lead), 32 Leads package provides greater flexibility.Gate drivers is packaged in the way of Tape & Reel (TR).Configuration is supported by 6 drivers.In the direction of Surface Mount, gate drivers is mounted.In the absence of a power supply voltage of 10V~20V V, it is able to demonstrate its superiority.A gate type of IGBT, N-Channel MOSFET is used in its design.Temperature range 125°C TJ is allowed for this device.Input type of Inverting is used.32 terminations constitute its foundation.The base part number IR2235JPBF refers to a number of related parts.In this case, Surface Mount indicates how the device is mounted.A total of 44 pins are available on the device.The device is specifically designed to operate at 15V volts.There is a maximum output current of 500mA.A boot strap voltage of 1200V is the maximum possible high-side voltage.The output current of this device can be set to 200mA.Considering its maximum power dissipation, 2W shows its maximum capacity to transfer and conduct power loss without overheating.In addition, FLOATING LOAD DRIVER; UNDER VOLTAGE LOCKOUT CIRCUIT can also be provided using a unique technology.The system operates at a resistance of 100Ohm.
IR2235JTRPBF Features
Embedded in the Tape & Reel (TR) package
6 drivers
Employing a gate type of IGBT, N-Channel MOSFET
44 pins
High-side voltage - Max (Bootstrap) of 1200V
Maximum power dissipation of 2W
FLOATING LOAD DRIVER; UNDER VOLTAGE LOCKOUT CIRCUIT
Resistance of 100Ohm
IR2235JTRPBF Applications
There are a lot of Infineon Technologies IR2235JTRPBF gate drivers applications.
- Telecom switch mode power supplies
- Isolated switch mode power supplies (SMPS)
- Isolated Supplies for controller area network (CAN),
- Motor controllers
- White Goods - Air Conditioner, Washing Machine,
- Industrial motor drives - compact, standard, premium, servo drives
- Dual-Battery Systems
- Digitally controlled power supplies
- UPS systems
- DC/DC converters
