Parameters |
Mount |
Through Hole |
Package / Case |
DIP |
Packaging |
Bulk |
Published |
2004 |
JESD-609 Code |
e0 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Max Operating Temperature |
150°C |
Min Operating Temperature |
-40°C |
Additional Feature |
FLOATING LOAD DRIVER; UNDER VOLTAGE LOCKOUT CIRCUIT |
Subcategory |
MOSFET Drivers |
Technology |
CMOS |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
225 |
Number of Functions |
1 |
Supply Voltage |
15V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Pin Count |
8 |
Qualification Status |
Not Qualified |
Temperature Grade |
AUTOMOTIVE |
Max Supply Voltage |
20V |
Min Supply Voltage |
5V |
Power Dissipation-Max |
1W |
Nominal Supply Current |
120μA |
Propagation Delay |
220 ns |
Turn On Delay Time |
220 ns |
Voltage - Output |
10V |
Rise Time |
130ns |
Fall Time (Typ) |
50 ns |
Turn-Off Delay Time |
200 ns |
Interface IC Type |
HALF BRIDGE BASED MOSFET DRIVER |
Number of Drivers |
2 |
Turn On Time |
0.3 μs |
Output Peak Current Limit-Nom |
0.35A |
Max Junction Temperature (Tj) |
150°C |
High Side Driver |
YES |
Ambient Temperature Range High |
150°C |
Height |
5.33mm |
Length |
9.88mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Contains Lead |
IR2301 Overview
For greater flexibility, the DIP package is adopted.There is a package in the form of Bulk.There are 2 drivers installed for this device.There are 8 terminations to form the base of its configuration.Mounting the device requires Through Hole.In order to operate, a voltage of 15V has to be applied.Mosfet driver is equipped wMosfet driverh an interface chip HALF BRIDGE BASED MOSFET DRIVER.This subcategory of MOSFET Drivers has a number of useful electronic components.There are 8 component pins on the board.The allowable maximum value of operating temperature is 150°C.Temperatures below -40°C are allowed as the minimum.For operation, it requires a voltage of 20V.In order for it to operate, the supply voltage of 5V must be maintained.In addition, technology that is unique can be used to provide FLOATING LOAD DRIVER; UNDER VOLTAGE LOCKOUT CIRCUIT.10V is its output voltage.
IR2301 Features
Embedded in the Bulk package
2 drivers
FLOATING LOAD DRIVER; UNDER VOLTAGE LOCKOUT CIRCUIT
IR2301 Applications
There are a lot of International Rectifier IR2301 gate drivers applications.
- PCMCIA applications
- Automotive Applications
- General Purpose 3-Phase Inverter
- Motor controllers
- Telecom switch mode power supplies
- A/D drivers
- Portable computers
- Isolated switch mode power supplies (SMPS)
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Isolated Supplies for controller area network (CAN),