IR2308SPBF
| Parameters | |
|---|---|
| Channel Type | Independent |
| Turn On Time | 0.3 μs |
| Output Peak Current Limit-Nom | 0.35A |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 200mA 350mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.9V |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 1.4986mm |
| Length | 4.9784mm |
| Width | 3.9878mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 625mW |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | IR2308SPBF |
| Number of Outputs | 2 |
| Output Voltage | 620V |
| Max Output Current | 350mA |
| Power Supplies | 15V |
| Nominal Supply Current | 1.6mA |
| Power Dissipation | 625mW |
| Output Current | 200mA |
| Propagation Delay | 300 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 220 ns |
| Max Output Voltage | 20V |
| Rise Time | 220ns |
| Fall Time (Typ) | 80 ns |
| Turn-Off Delay Time | 200 ns |
| Min Output Voltage | 10V |
| Rise / Fall Time (Typ) | 150ns 50ns |
IR2308SPBF Overview
Gate drivers provides greater flexibilGate driversy to use the 8-SOIC (0.154, 3.90mm Width) package.A packaging method of Tube is used.Surface Mount is mounted in the way.When the supply voltage is 10V~20V it is able to demonstrate its superiority.IGBT, N-Channel MOSFET is the gate type used for this design.This device is allowed to operate in a temperature range of -40°C~150°C TJ.The input type is Non-Inverting.Mosfet driver consists of 8 terminations as Mosfet drivers foundation.Mosfet driver is possible to find various related parts under Mosfet drivers base part number IR2308SPBF.The mount method is Surface Mount.The pins are configured with 8 when designing the chip.Mosfet driver is designed specifically to run on 15V volts of power.As a maximum, there is 350mA limit to the output current.Several electronic components are included in its subcategory of MOSFET Drivers.Max (Bootstrap) can be as high as 600V.The basis of this system consists of 2 outputs.Mosfet driver supports an output current of 200mA.According to its maximum power dissipation, 625mW is capable of conducting and transferring a large amount of power without overheating.With its power supplies of 15V, it solves the problems of power supply for a variety of applications.The voltage it outputs is 620V.In order to maintain the maximum output voltage, it must be set at 20V.
IR2308SPBF Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 625mW
IR2308SPBF Applications
There are a lot of Infineon Technologies IR2308SPBF gate drivers applications.
- DC/DC converters
- Topologies
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Isolated Gate Driver Supplies
- Head-up and Head mounted displays
- serial peripheral interface (SPI), I2C
- PCMCIA applications
- Power factor correction (PFC) circuits
- A/D drivers
- High frequency line drivers
